Page 9 of 12
Re: ELV MAX! protocol description
Posted: Tue Nov 11, 2014 6:54 am
by mike7
Error323 wrote:
For my attempt in home automation I want to bypass the cube completely and control the valves directly via a 868 MHz transceiver. Does anybody here know the internal protocol between cube and valve components? I can't seem to find it anywhere, is it FHT based or completely different?
you can start here
domoticaforum.eu/viewtopic.php?f=66& ... mp;start=0
Re: ELV MAX! protocol description
Posted: Tue Nov 11, 2014 10:31 am
by Error323
Excellent! Thank you!
Re: ELV MAX! protocol description
Posted: Tue Nov 11, 2014 10:47 am
by Massi
i really can't see the advantage of bypassing the cube (except the €30 not spent, obviously
).. could you please explain me?
Re: ELV MAX! protocol description
Posted: Fri Dec 05, 2014 9:40 pm
by mactoolz
Hi,
this is my first post and came across this very interesting topic.
Has anyone tried the protocol on Ethernet socket base with a wago controller 750-880 implemented.
MacToolz
Re: ELV MAX! protocol description
Posted: Sat Dec 27, 2014 5:32 pm
by philjung77
Hello,
Regarding wall thermostat (device type = 3), the L message contains 12 bytes. Length is 12 (of course
) and last byte represents the real temperature x 10.
0xaf => 175 => 17,5 degrees
Philippe
Re: ELV MAX! protocol description
Posted: Sun Dec 28, 2014 3:29 pm
by pbrand
philjung77 wrote:Hello,
Regarding wall thermostat (device type = 3), the L message contains 12 bytes. Length is 12 (of course
) and last byte represents the real temperature x 10.
0xaf => 175 => 17,5 degrees
Philippe
Don't know if you have a new type wall thermostat Philippe, but my wall thermostat L message is 7 bytes long whereas the actual temperature is represented by the MSB bit of the third byte together with the seventh byte ( x 10).
Regards,
Peter
Re: ELV MAX! protocol description
Posted: Sun Dec 28, 2014 7:20 pm
by Massi
pbrand wrote:philjung77 wrote:Hello,
Regarding wall thermostat (device type = 3), the L message contains 12 bytes. Length is 12 (of course
) and last byte represents the real temperature x 10.
0xaf => 175 => 17,5 degrees
Philippe
Don't know if you have a new type wall thermostat Philippe, but my wall thermostat L message is 7 bytes long whereas the actual temperature is represented by the MSB bit of the third byte together with the seventh byte ( x 10).
Regards,
Peter
12th byte is actual temp*10, so theres a limit: 25,5 degrees. if it's higher, the count starts from 0 again and the first bit of byte 8 (set temp) is set to one
This is the standard wall thermostat.
I don't believe your response can be simply 7 bytes, as always it will be 6 bytes for ecoswitch, 11 for radiator thermostat and 12 for wall thermostat.
Maybe you are not counting starting bytes
1) data lenght
2,3,4) rf address
5) unknown
So then there are 7 bytes
Re: ELV MAX! protocol description
Posted: Sun Dec 28, 2014 8:06 pm
by pbrand
Oh silly me. You are quite right, Massi. I only looked at the specific device bytes and forgot about the generic part
Re: ELV MAX! protocol description
Posted: Mon Dec 29, 2014 6:17 pm
by Massi
pbrand wrote:Oh silly me. You are quite right, Massi. I only looked at the specific device bytes and forgot about the generic part
No, you'll not get excused.
For that, you need to add to you blog the protocol description of the s: command
Re: ELV MAX! protocol description
Posted: Tue Dec 30, 2014 12:43 am
by mactoolz
Hi,
it may be that in the new firmware 1.4.1, the commands have changed in their byte protocol?
Thanks
MacToolz
Re: ELV MAX! protocol description
Posted: Wed Dec 31, 2014 1:17 am
by Massi
mactoolz wrote:Hi,
it may be that in the new firmware 1.4.1, the commands have changed in their byte protocol?
Thanks
MacToolz
my "simple" commands (manual temp set) still work. What commands are you referring to?
Re: ELV MAX! protocol description
Posted: Wed Dec 31, 2014 10:36 am
by mactoolz
Hi,
i want to use all the commands. At least M / H / C / L and also the sending of data.
e.g. the byte arrangement of the M command I am missing some information. Rather, I do not know what type specific bytes of information again.
e.g. I have not in my receiving data, the RF address.
Look Please purely in the excel. Since I have the Empfangsdasten divided times.
You may find, for example, the RF address.
Thanks
MacToolz
Re: ELV MAX! protocol description
Posted: Wed Dec 31, 2014 2:06 pm
by pbrand
I am running 1.4.1 firmware here and have seen no changes in the M / H / C / L messages.
Re: ELV MAX! protocol description
Posted: Fri Jan 02, 2015 3:12 pm
by Massi
pbrand wrote:I am running 1.4.1 firmware here and have seen no changes in the M / H / C / L messages.
Full quote.
No changes in last firmware
Re: ELV MAX! protocol description
Posted: Fri Jan 02, 2015 4:26 pm
by mactoolz
Hi,
have you looked at the excel. This is an excerpt from the M command. I see no RF address here. The first topic is described which can be seen in the M-command for a device address.
I do not see them unfortunately. Can you tell me the individual bytes?
Code: Select all
Result JEQ0416392 --> 21('21') 3('3') 1('1') 210('Ò') 240('ð') 74('J') 69('E') 81('Q') 48('0') 49('1') 54('6') 51('3') 57('9') 50('2')
Result AZ_WandThermo --> 48('0') 13('CR') 65('A') 90('Z') 95('_') 87('W') 97('a') 110('n') 100('d') 84('T') 104('h') 101('e') 114('r') 109('m') 111('o')
Thanks
MacToolz