ELV MAX! help with the send commands etc

Forum about the home automation suites by ELV etc

Moderator: jrkalf

Locked
kami
Starting Member
Starting Member
Posts: 1
Joined: Sun Nov 27, 2011 4:17 pm

ELV MAX! help with the send commands etc

Post by kami »

Hi,

i looking for a little help with the send commands and the MAX Cube. I am trying to run a perl script, which is always checking the mode of the windows contacts and gives back the Temperature of the Thermostats if i give a external command to the script. Can someone tell me, how i can get this information from the cube if i am connected to the cube? So there should be no reconnect to the cube. The Connection is opened and i want to send the commands to get this information. I know the RF-Adress and all of this stuff. But how can i get more informations?

Thanks a lot for some help :)

Cu kami
User avatar
jrkalf
Member
Member
Posts: 291
Joined: Fri Nov 12, 2010 4:20 pm
Location: Nootdorp
Contact:

Re: ELV MAX! help with the send commands etc

Post by jrkalf »

Hi kami,

welcome to this forum. Please check the first 2 sticky topics on the ELV Max! information. They contain all the information you'd possible ever wanted to know about ELV MAX!

http://www.domoticaforum.eu/viewtopic.php?f=66&t=6239
http://www.domoticaforum.eu/viewtopic.php?f=66&t=6654

closing this thread.
If you can't fix it with a hammer, you've got an electrical problem!

Fibaro HC2, various z-wave switching, alerting, detection modules.
ELV FHT80b heating system.
Locked

Return to “Homematic, FS20, FHT, ESA and ELV”