Problems with ELV MAX! protocol connection

Forum about the home automation suites by ELV etc

Moderator: jrkalf

Post Reply
ceemjay
Starting Member
Starting Member
Posts: 8
Joined: Tue Jan 01, 2013 4:43 pm

Problems with ELV MAX! protocol connection

Post by ceemjay »

Just starting out with this so please forgive any stupid/previously answered questions!

Looked at the post " ELV MAX! protocol description" and it appears to me I should be able to make a connection to the Cube on port 80 using Telnet?? When I try it disconnects straight away.

I am using the correct IP address and there are no other connections to it - rebooted the Cube to make sure.

Have I misunderstood what to do or is there something else causing this?

Many thanks
ceemjay
Digit
Global Moderator
Global Moderator
Posts: 3388
Joined: Sat Mar 25, 2006 10:23 am
Location: Netherlands
Contact:

Re: Problems with ELV MAX! protocol connection

Post by Digit »

- ELV Max software still running? Kill it.
- Reboot done by power cycling the Cube? Wait half an hour or so and try again.
ceemjay
Starting Member
Starting Member
Posts: 8
Joined: Tue Jan 01, 2013 4:43 pm

Re: Problems with ELV MAX! protocol connection

Post by ceemjay »

Digit wrote:- ELV Max software still running? Kill it.
- Reboot done by power cycling the Cube? Wait half an hour or so and try again.
Thanks but I found, buried in another post, that the port is no longer 80 but 62910 - works a treat now.

ceemjay
User avatar
sj3fk3
Member
Member
Posts: 119
Joined: Mon Apr 23, 2012 8:33 am
Location: Abcoude

Re: Problems with ELV MAX! protocol connection

Post by sj3fk3 »

ceemjay wrote:Just starting out with this so please forgive any stupid/previously answered questions!

Looked at the post " ELV MAX! protocol description" and it appears to me I should be able to make a connection to the Cube on port 80 using Telnet?? When I try it disconnects straight away.
ceemjay
It's not using port 80 (any more). It uses port 62910. just type http://ip.adres.goes.here:62910/ and presto, Bob is your uncle!
Kind Regards,
Greg.
Digit
Global Moderator
Global Moderator
Posts: 3388
Joined: Sat Mar 25, 2006 10:23 am
Location: Netherlands
Contact:

Re: Problems with ELV MAX! protocol connection

Post by Digit »

Mine still does, last time I checked ;)
OK, so the port number is now depending on the firmware version you're using.
Post Reply

Return to “Homematic, FS20, FHT, ESA and ELV”