Simulating Max! Thermostat

Forum about the home automation suites by ELV etc

Moderator: jrkalf

Post Reply
peep
Starting Member
Starting Member
Posts: 1
Joined: Sun Feb 10, 2013 10:34 am

Simulating Max! Thermostat

Post by peep »

Hey,

I read in your forum and like your work on the Max! protocol very much. i work in a r&d department and know how difficult it could be to understand a foreign protocol.

I want to use the Max! Wall Thermostat and the cube, but i can't use the radiator thermostat, cause we have electric heater.
To work properly the Max! System needs such a thermostat. So here is my question.

Can someone tell me:
- what information the radiator thermostat sends to the cube (in normal operating mode and when it is pairing with the cube)?
- How it is send?

Unfortunately I have no experience in RF Applications, so there i would need a bit more help ;P
I would rather pay more if it's easier... (e.g. buy a complete rf-module)

Thanks and greetings from germany
Timo
Kingsammy
Starting Member
Starting Member
Posts: 17
Joined: Mon Dec 19, 2011 11:10 am

Re: Simulating Max! Thermostat

Post by Kingsammy »

Hallo Timo,

for electrical heaters or boilers you can use the "MAX! Zwischenstecker" (ON/OFF-Switching) which you can obtain here: http://www.ewe.de/privatkunden/ewe-spar ... eizung.php
And in addition with a MAX! Wallthermostate you can use the "MAX! Zwischenstecker" as a temperature regulated ON/OFF-switch.

Note: From ELV the Zwischenstecker could not be obtained yet.

Greetings

Kingsammy
Post Reply

Return to “Homematic, FS20, FHT, ESA and ELV”