Visonic Powermax Interface (Windows) application

Forum about Visonic products like Powermax Plus and Powermax Pro

Moderators: Rene, Willem4ever

Re: Visonic Powermax Interface (Windows) application

Postby al30k » Mon Aug 14, 2017 7:14 pm

Hi, is it possible to "arm away" or "arm home" in instant mode with this app?
I use it with "arm home" at night, to make perimeter sensors around house work without "entry delay".

According this, PowerMax plugin for Vera can do it and use same interface, http://code.mios.com/trac/mios_visonic-powermax

thanks.
al30k
Starting Member
Starting Member
 
Posts: 5
Joined: August 2017

Re: Visonic Powermax Interface (Windows) application

Postby bartbakels » Mon Aug 14, 2017 7:30 pm

I think this can be done by scripting in domoticz but dont use domoticz myself.
Software: HS3, HStouch, Plugwise , BLBackup, BLLatestImage, Zwave, JowiHUE, PHlocation, Netcam, Harmony Plugin, ThinkingCleaner, HSPhone, Eneco Toon Script, Pushover, Visonic Powermax LV Interface

(ON ESXI )on NUC
bartbakels
Member
Member
 
Posts: 499
Joined: May 2011

Re: Visonic Powermax Interface (Windows) application

Postby Blaabjerg » Tue Aug 15, 2017 7:42 am

Hi,

I would like to use the PIR to turn on and off lights when it is not arm and detect motion. The issue is that the PIR is detecting motion and the is reset very fast. I know that I can set the reset time on the PIR. But is it not possible to config the PIR to keep in "detect motion" state as long as there is movement?

Thanks

/Claus
Blaabjerg
Starting Member
Starting Member
 
Posts: 7
Joined: August 2016

Re: Visonic Powermax Interface (Windows) application

Postby bartbakels » Sun Aug 20, 2017 11:52 am

No sorry this is how the visonic panel is designed...
Software: HS3, HStouch, Plugwise , BLBackup, BLLatestImage, Zwave, JowiHUE, PHlocation, Netcam, Harmony Plugin, ThinkingCleaner, HSPhone, Eneco Toon Script, Pushover, Visonic Powermax LV Interface

(ON ESXI )on NUC
bartbakels
Member
Member
 
Posts: 499
Joined: May 2011

Re: Visonic Powermax Interface (Windows) application

Postby Blaabjerg » Mon Sep 11, 2017 8:30 pm

Hi,

I have a MCM-140 unit. Visonic driver setting does not seem to register when I arm and disarm.

Am I not able to see events when I use MCM-140 remote keypad?

Thanks

/Claus
Blaabjerg
Starting Member
Starting Member
 
Posts: 7
Joined: August 2016

Re: Visonic Powermax Interface (Windows) application

Postby bartbakels » Wed Sep 13, 2017 11:01 am

Blaabjerg wrote:Hi,

I have a MCM-140 unit. Visonic driver setting does not seem to register when I arm and disarm.

Am I not able to see events when I use MCM-140 remote keypad?

Thanks

/Claus


claus,

NO, first of all the panel events will be registered whatever used, but you can even trigger events on use of the MCW-140 (disarm/arm etc) as a separate event. I use them as well (2 of them) and this works great. So my panel status updates in HS3 obviously, but I also created to virtual devices which shows me when and which mcw-140 is used to arm/disarm.

bart
Software: HS3, HStouch, Plugwise , BLBackup, BLLatestImage, Zwave, JowiHUE, PHlocation, Netcam, Harmony Plugin, ThinkingCleaner, HSPhone, Eneco Toon Script, Pushover, Visonic Powermax LV Interface

(ON ESXI )on NUC
bartbakels
Member
Member
 
Posts: 499
Joined: May 2011

Re: Visonic Powermax Interface (Windows) application

Postby Blaabjerg » Wed Sep 13, 2017 2:29 pm

bartbakels wrote:
Blaabjerg wrote:Hi,

I have a MCM-140 unit. Visonic driver setting does not seem to register when I arm and disarm.

Am I not able to see events when I use MCM-140 remote keypad?

Thanks

/Claus


claus,

NO, first of all the panel events will be registered whatever used, but you can even trigger events on use of the MCW-140 (disarm/arm etc) as a separate event. I use them as well (2 of them) and this works great. So my panel status updates in HS3 obviously, but I also created to virtual devices which shows me when and which mcw-140 is used to arm/disarm.

bart


Ok. But can you detect witch user / kode that have disarmed / armed the alarm?

/Claus
Blaabjerg
Starting Member
Starting Member
 
Posts: 7
Joined: August 2016

Re: Visonic Powermax Interface (Windows) application

Postby Blaabjerg » Wed Sep 27, 2017 6:54 pm

I'm able to run the DISARM_[securityAdditionString] to disarm my alarm. But i would like to detect witch user that disarm my alarm.

Is that possible?

Ex: DISARM_[USERCODE]

Thanks

Regards

Claus
Blaabjerg
Starting Member
Starting Member
 
Posts: 7
Joined: August 2016

Re: Visonic Powermax Interface (Windows) application

Postby bartbakels » Wed Oct 04, 2017 11:29 am

Blaabjerg wrote:I'm able to run the DISARM_[securityAdditionString] to disarm my alarm. But i would like to detect witch user that disarm my alarm.

Is that possible?

Ex: DISARM_[USERCODE]

Thanks

Regards

Claus


Claus,

sorry for the late response, again I didn't get an update from the board, and was on holiday :D

I far as I know I cant detect the used usercode, however I don't use this my self. I have similar functionality but I use keyfobs, proxytags and wireless commanders. These can be userspecific off course, and I defined in the user event config tab the following actions;

keyfob 3 arm home httpcall1
keyfob 4 disarm httpcall2

to determine the actions of these devices and report these back to hs3, or vera, domoticz etc.

hope this helps?


Bart
Software: HS3, HStouch, Plugwise , BLBackup, BLLatestImage, Zwave, JowiHUE, PHlocation, Netcam, Harmony Plugin, ThinkingCleaner, HSPhone, Eneco Toon Script, Pushover, Visonic Powermax LV Interface

(ON ESXI )on NUC
bartbakels
Member
Member
 
Posts: 499
Joined: May 2011

Re: Visonic Powermax Interface (Windows) application

Postby Blaabjerg » Mon Oct 30, 2017 5:21 am

bartbakels wrote:
Blaabjerg wrote:I'm able to run the DISARM_[securityAdditionString] to disarm my alarm. But i would like to detect witch user that disarm my alarm.

Is that possible?

Ex: DISARM_[USERCODE]

Thanks

Regards

Claus


Claus,

sorry for the late response, again I didn't get an update from the board, and was on holiday :D

I far as I know I cant detect the used usercode, however I don't use this my self. I have similar functionality but I use keyfobs, proxytags and wireless commanders. These can be userspecific off course, and I defined in the user event config tab the following actions;

keyfob 3 arm home httpcall1
keyfob 4 disarm httpcall2

to determine the actions of these devices and report these back to hs3, or vera, domoticz etc.

hope this helps?


Bart


Yes, I have also configured my keyforbs like that. But ex. a wireless commander can have multiple users entering a code. And that could be cool get what number that have been entered, because then I know with user who have disarm/armed the alarm.

Do you use HS3?

If you do, do you know if it is possible to disarm the alarm from a tablet interface (On a security panel) with the user code that have been assigned in the Powermax alarm?

Thanks

/Claus
Blaabjerg
Starting Member
Starting Member
 
Posts: 7
Joined: August 2016

Re: Visonic Powermax Interface (Windows) application

Postby bartbakels » Mon Oct 30, 2017 8:47 am

claus,

No its not possible to determine which code is used on the keypads. These codes are not stored in the panel but in the keypad itself.

Yes im using Hs3, and you can create an HStopucyh window to arm and disarm, but again, i cant extract the codes from the panel, to do so. You could create your own codeentry object in hstouch probably with stored codes.

regards

Bart
Software: HS3, HStouch, Plugwise , BLBackup, BLLatestImage, Zwave, JowiHUE, PHlocation, Netcam, Harmony Plugin, ThinkingCleaner, HSPhone, Eneco Toon Script, Pushover, Visonic Powermax LV Interface

(ON ESXI )on NUC
bartbakels
Member
Member
 
Posts: 499
Joined: May 2011

Getting armed status from HS3

Postby Mario from Spain » Tue Feb 27, 2018 10:22 am

Hi Bart

Sometimes HS3 looses sync with the visonic driver status (armed, disarmed, arm, home, etc). How can I get the armed status from HS?

I tried http://ip:3011/VisonicDriver/jsonget?se ... tionString but it only returns {"Alarm":"FALSE","Alert in memory":"FALSE","Arm/disarm":"FALSE","ByPass":"FALSE","Last 10 seconds delay":"FALSE","Log Events":"","Ready":"FALSE","System Status":"","Trouble":"FALSE","Zone Event":"FALSE","Zone/User":"","ZoneEvent Types":"","Zones State":]} without status about the arm status.

Also, anyway to do something similar to get the status of each zone?

Thank you.

Mario
Mario from Spain
Member
Member
 
Posts: 57
Joined: December 2013

Re: Visonic Powermax Interface (Windows) application

Postby Mario from Spain » Fri Mar 16, 2018 12:09 pm

Hi Bart.

I still have this issue with many errors each hour I suspect it has something to do with the loss of sync I suffer from time to time (maybe the program isn't processing communications with the popup with the error appears?).

It's a serious problem for me now as my system each time relies more on the data received from my Powermax system. Look at the frequency of errors:


Code: Select all
2018-03-16 10:02:29,314   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2018-03-16 10:02:36,080   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2018-03-16 10:09:37,448   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2018-03-16 10:09:44,363   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2018-03-16 10:10:49,563   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2018-03-16 10:11:00,020   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2018-03-16 10:11:09,294   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2018-03-16 10:11:19,102   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2018-03-16 10:11:51,132   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2018-03-16 10:11:59,849   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2018-03-16 10:14:14,969   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2018-03-16 10:14:20,806   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2018-03-16 10:15:49,397   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2018-03-16 10:15:56,098   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2018-03-16 10:16:03,489   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2018-03-16 10:16:31,687   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2018-03-16 10:21:46,918   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2018-03-16 10:21:55,747   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2018-03-16 10:22:04,561   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2018-03-16 10:22:29,303   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2018-03-16 10:29:39,007   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2018-03-16 10:29:48,042   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2018-03-16 10:29:55,430   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2018-03-16 10:30:24,641   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2018-03-16 10:35:03,600   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2018-03-16 10:35:11,330   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2018-03-16 10:35:18,411   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2018-03-16 10:35:41,723   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2018-03-16 10:37:32,898   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2018-03-16 10:37:39,071   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2018-03-16 10:37:49,201   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi



bartbakels wrote:Mario,

First the easy part, The error, is an error when the http get call can not be exectuted, probably you have a wrong url in the configurations somewhere, check the http calls you make if they are all correct.


regarding your zones, i have an idea, but is it correct that you now have for example zone 1 until 15 in use and zone 20, and 16 until 19 are not in use?

Bart


Mario from Spain wrote:
bartbakels wrote:released new version;


v1.0.7 Release With Build IN Webserver Installer Location V1.0.7 UPDATED

Changes

- BUG in HTTP GET which prevented Get command with (") and spaces
- Signal strength indicator of sensors available

MARIO please try this build for your HTTP Get Issue

Bart


Hi Bart.

I'm back from my vacation trip (good things are always very short :( ).

Tried the HTTP GET issue with (") and spaces with the new 1.0.7 version and it's working fine now. Thank you! :D

One of my sensors (zone 20) where not reporting correctly (can see the Open and Close events in the log but Last change was always 00:00:00.000 and didn't call the HTTP URL. I deleted the sensor and recreated it as zone 21 and now it's working fine. I'm not sure if the fault was on my Powermax system or in the Visonic Driver but it looks to me like a bug in the Visonic Driver affecting Zone 20 (don't know for sure if all other zones are working fine as I use just 15 zones out of the 28 my panel permits).

I still get this error very often (I don't thing it's related to previous issue):
Image

Code: Select all

2016-07-07 14:19:19,179   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-09 15:20:21,185   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-09 15:36:28,743   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-11 09:53:10,209   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-11 10:01:13,140   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-17 09:36:56,728   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-19 10:08:46,858   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-19 15:53:02,932   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-21 09:57:08,998   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-24 09:40:17,615   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-25 04:08:30,888   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-25 23:12:17,631   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-26 03:40:49,023   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 10:03:06,990   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 10:49:39,349   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 10:49:44,889   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 10:49:50,285   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 10:51:43,563   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 10:52:11,349   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC CONTROL.vi->Visonic MAIN.vi

2016-07-27 11:06:46,550   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC CONTROL.vi->Visonic MAIN.vi

2016-07-27 11:06:48,434   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 11:06:49,572   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 11:07:18,802   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC CONTROL.vi->Visonic MAIN.vi

2016-07-27 11:10:18,299   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 11:11:27,691   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 11:11:45,525   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 11:12:12,608   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2016-07-27 11:21:44,812   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 11:22:58,424   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 11:23:26,228   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC CONTROL.vi->Visonic MAIN.vi

2016-07-27 11:24:54,174   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 11:25:18,502   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 11:29:13,624   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 11:30:20,142   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 11:30:48,220   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC CONTROL.vi->Visonic MAIN.vi

2016-07-27 11:34:46,448   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 11:37:33,806   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 11:40:08,695   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 11:40:57,669   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 11:42:41,710   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 11:44:04,358   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 11:45:11,436   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 11:45:39,062   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2016-07-27 13:34:03,654   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2016-07-27 13:34:09,082   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2016-07-27 13:34:14,287   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2016-07-27 13:34:19,509   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:34:24,755   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:34:29,979   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:34:35,308   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:34:40,871   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2016-07-27 13:34:46,189   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC CONTROL.vi->Visonic MAIN.vi

2016-07-27 13:34:51,426   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:34:56,642   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC CONTROL.vi->Visonic MAIN.vi

2016-07-27 13:35:02,031   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:35:07,361   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:35:12,659   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:35:17,934   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:35:23,205   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:35:28,754   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC CONTROL.vi->Visonic MAIN.vi

2016-07-27 13:35:34,663   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:35:40,361   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:35:44,191   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC CONTROL.vi->Visonic MAIN.vi

2016-07-27 13:35:47,968   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:35:49,036   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:35:50,016   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:35:51,167   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:35:56,586   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:36:02,127   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:36:07,701   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:36:13,346   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:36:19,485   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC CONTROL.vi->Visonic MAIN.vi

2016-07-27 13:36:24,796   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:36:30,121   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC CONTROL.vi->Visonic MAIN.vi

2016-07-27 13:36:35,597   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:36:40,893   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:36:46,197   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:36:51,546   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC CONTROL.vi->Visonic MAIN.vi

2016-07-27 13:36:56,865   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:37:02,235   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC CONTROL.vi->Visonic MAIN.vi

2016-07-27 13:37:07,609   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:37:12,992   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:37:18,302   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:37:23,576   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC CONTROL.vi->Visonic MAIN.vi

2016-07-27 13:37:27,339   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:37:30,415   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:37:35,691   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:37:40,961   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:37:44,300   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:37:45,435   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC CONTROL.vi->Visonic MAIN.vi

2016-07-27 13:37:46,432   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:37:47,419   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:37:48,769   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC CONTROL.vi->Visonic MAIN.vi

2016-07-27 13:37:49,767   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:37:50,710   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:37:51,748   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC CONTROL.vi->Visonic MAIN.vi

2016-07-27 13:37:52,631   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:38:46,956   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:42:32,473   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:43:00,411   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2016-07-27 13:44:41,563   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:44:57,206   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:45:32,282   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:45:38,000   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:45:47,855   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 13:46:01,799   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2016-07-27 13:46:14,175   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2016-07-27 14:28:10,211   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 14:28:15,492   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 14:28:25,583   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 14:28:45,736   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2016-07-27 14:50:00,349   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 14:50:28,173   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2016-07-27 14:51:02,513   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 14:51:08,233   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 14:51:18,015   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 14:51:31,945   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2016-07-27 14:51:45,306   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2016-07-27 14:53:08,991   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 14:53:14,274   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 14:53:39,287   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 14:55:27,717   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 14:55:55,594   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2016-07-27 14:57:50,331   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 14:58:18,091   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2016-07-27 14:58:23,411   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 14:58:33,871   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 14:58:39,128   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 14:59:01,419   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2016-07-27 14:59:37,936   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 15:00:06,391   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2016-07-27 15:12:00,252   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 15:12:27,714   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2016-07-27 15:17:58,470   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 15:18:26,333   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2016-07-27 15:21:50,481   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 15:22:18,028   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2016-07-27 15:38:41,633   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 15:39:09,523   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2016-07-27 15:40:53,255   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 15:41:21,095   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2016-07-27 15:44:03,064   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 15:44:30,869   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2016-07-27 15:53:38,818   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 15:53:54,962   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 15:54:08,147   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2016-07-27 15:55:47,334   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 16:01:38,133   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 16:02:06,274   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2016-07-27 16:08:04,734   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 16:08:34,227   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2016-07-27 16:08:39,580   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 16:08:44,871   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 16:09:09,565   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->VISONIC GUI.vi->Visonic MAIN.vi

2016-07-27 16:09:44,208   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 16:10:59,545   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 16:12:02,713   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 16:40:50,195   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 16:40:55,477   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

2016-07-27 16:41:18,484   VisonicDriver.exe   error   56   0   LabVIEW:  The network operation exceeded the user-specified or system time limit.
HTTP GET   TCP Read in Example HTTP GET method.vi->Zones ChangeHandler.vi->SensorStatesHandler.vi->decode hex.vi->VISONIC DAQ.vi->Visonic MAIN.vi

Mario from Spain
Member
Member
 
Posts: 57
Joined: December 2013

Re: Visonic Powermax Interface (Windows) application

Postby bartbakels » Fri Mar 16, 2018 1:07 pm

Mario,

Sorry i dont get the forum updates somehow again :s


Regarding your issue, please check if the status of the panel is correct in the driver and i suspect it is:) no errors regarding the panel connection.


The issue you see is as stated before, that the http calls configured can not be executed , prob because a typo. It is not good practise to query the driver for the panel and zone state but these are being trasferred by the http cals to homeseer.


Bart
Software: HS3, HStouch, Plugwise , BLBackup, BLLatestImage, Zwave, JowiHUE, PHlocation, Netcam, Harmony Plugin, ThinkingCleaner, HSPhone, Eneco Toon Script, Pushover, Visonic Powermax LV Interface

(ON ESXI )on NUC
bartbakels
Member
Member
 
Posts: 499
Joined: May 2011

Re: Visonic Powermax Interface (Windows) application

Postby al30k » Wed May 23, 2018 6:43 pm

hello
do you know what can be wrong? my powermax complete only shows current status of panel(disarm, delay,armed...) (with some lags) but doestn show any other information (panel info, zones etc.) and doesn't react on pressing arm or disarm in windows app.
thanks
Attachments
IMG_9143.JPG
IMG_9143.JPG (272.07 KiB) Viewed 791 times
al30k
Starting Member
Starting Member
 
Posts: 5
Joined: August 2017

PreviousNext

Return to Visonic Alarm systems

Who is online

Users browsing this forum: No registered users and 1 guest