PowerMax+ and USR-TCP232-E2

Forum about Visonic products like Powermax Plus and Powermax Pro

Moderators: Rene, Willem4ever

PowerMax+ and USR-TCP232-E2

Postby Chura » Fri Jun 08, 2018 4:01 pm

Hi

I've connected the USR-TCP232 to my Powermax panel and i'm getting power and everything is up and running.
When I open telnet to the panel i get some weird responses :
½
C
½
C

PM TX to USR RX
PM RX to USR TX
Baud 9600
Parity none
data 8
stop 1

What am I doing wrong
Chura
Starting Member
Starting Member
 
Posts: 1
Joined: June 2018

Re: PowerMax+ and USR-TCP232-E2

Postby cjcharles » Mon Sep 24, 2018 10:08 pm

You are probably seeing the ASCII representation of the bytes that are being sent and received. You need to configure telnet to display raw information (or probably change tool since I dont think telnet can do that....)
cjcharles
Starting Member
Starting Member
 
Posts: 16
Joined: April 2016


Return to Visonic Alarm systems

Who is online

Users browsing this forum: No registered users and 1 guest