Connecting Klik aan Klik uit to powermax

Forum about Visonic products like Powermax Plus and Powermax Pro

Moderators: Rene, Willem4ever

Connecting Klik aan Klik uit to powermax

Postby amu0373 » Mon Jan 04, 2016 12:51 pm

Hi, I have a couple of D-Link IP cams. I don’t want them enabled when at home so they are on KAKU (Klik Aan Klik Uit) switches. I manually turn the cameras on/off using the KAKU remote when I leave or arrive at home.
I would like have the cameras automatically switched on/off on a PowerMax arm/disarm event.

Any ideas on the cheapest solution?

I tried to find some information on how to wire my KAKU remote to either the X10 of RS232 port.
I do not have either X10 module nor RS232 cable.

Thanks for your thoughts, Alex.
Starting Member
Starting Member
Posts: 1
Joined: January 2016

Re: Connecting Klik aan Klik uit to powermax

Postby uAlex73 » Tue Jan 12, 2016 10:58 am

I checked the manuals ( ... 302542.pdf), but it doesn't seem to be possible to switch on arm/disarm mode.

So you need to connect your powermax to a home automation system, and use that to switch the KlikAanKlikOut. I only know Vera/PowerMax plugin can directly switch X-10 and DomotiGa (via RFXCom) can support it (maybe Domoticz - but i don't use it)
DomotiGa / Z-Wave / RFXCom / Visonic PowerMaster / Home Assistant / Zigbee2MQTT / DSMR Reader / Toon1 (rooted)
Posts: 217
Joined: January 2012

Re: Connecting Klik aan Klik uit to powermax

Postby mlstolk » Fri Feb 12, 2016 8:12 am

If you have the I/O expansion option installed, there is a simple programmable low-current PGM (I believe @12v) output, which you can use to trigger the kaku transmission with some simple schematic or microcontroller.
Starting Member
Starting Member
Posts: 7
Joined: November 2009
Location: Netherlands

Return to Visonic Alarm systems

Who is online

Users browsing this forum: No registered users and 1 guest