Powermax pro Remote Programmer

Forum about Visonic products like Powermax Plus and Powermax Pro

Moderators: Rene, Willem4ever

Post Reply
Lordsauron
Starting Member
Starting Member
Posts: 31
Joined: Fri Mar 27, 2009 5:15 pm
Location: Netherlands

Powermax pro Remote Programmer

Post by Lordsauron »

I seem to not have a lot of good fortun with connecting to hardware. (damn plugwise software)
I have a powermax pro and the rs232 interface.
i have got a (sweex :() usb to rs232 adapter and that is set to com7
i set the software to connect to com7 the software is searching for the powermax but it can't find it. only thing i can find is the download code AAAA and installcode 9999.
the powermax is set to factory settings any one found any problems with what i am doing?
User avatar
Rene
Global Moderator
Global Moderator
Posts: 1689
Joined: Wed Oct 08, 2008 3:54 pm
Location: Netherlands

Powermax pro Remote Programmer

Post by Rene »

First you must be able to connect to the Powermax. Only to login you need the download code. So if you cannot even connect to the Powermax, there is something wrong with either you usb-serial converter, your cable or the RS232 interface in the Powermax.

Rene.
Edwin2008
Advanced Member
Advanced Member
Posts: 721
Joined: Fri Nov 28, 2008 4:14 pm
Location: Netherlands

Powermax pro Remote Programmer

Post by Edwin2008 »

Try a different usb port in an attempt to get a lower com port number. Some software does not like the higher port numbers.
Lordsauron
Starting Member
Starting Member
Posts: 31
Joined: Fri Mar 27, 2009 5:15 pm
Location: Netherlands

Powermax pro Remote Programmer

Post by Lordsauron »

Tryed both no bingo ;(
Post Reply

Return to “Visonic Alarm systems”