Powerlink2 compatible with Powermax Pro 5.2.08 or higher

Forum about Visonic products like Powermax Plus and Powermax Pro

Moderators: Rene, Willem4ever

Post Reply
marck
Member
Member
Posts: 127
Joined: Sat Sep 18, 2010 4:12 pm

Powerlink2 compatible with Powermax Pro 5.2.08 or higher

Post by marck »

According to the following link you need at least version 5.2.08
- http://www.homesecuritystore.com/p-1824 ... odule.aspx

The be able to control the alarm via your Iphone/Ipad you can only use the Powerlink2, is does not work with the powerlink 1.

I bought a Powermax Pro less than a year ago, and the powerlink2 is not compatible with the Powermax Pro I have. It s..ks big time. So far for the modular design of Visonic :(

By the way, Waakzaamwonen has the Powerlink2 for a sale (http://www.waakzaamwonen.com/intpl2-int ... p-564.html)

And this one is compatible with the new White Partition Powermax Pro.

Van de Powerlink zijn er drie varianten verschenen:
- Externe module Powerlink, te gebruiken in combinatie met Powermax Plus en alle generaties Powermax Pro, te koop in deze webwinkel
- Interne module Powerlink PRO, te gebruiken in combinatie met alle generaties Powermax Pro, waaronder de 1e generatie Powermax Pro centrales (zonder partitie); te koop in deze webwinkel
- Interne module Powerlink2 (dit artikel), te gebruiken in combinatie met huidige Powermax Pro centrales (met partitie), Powermax Complete en Powermax Express


Rg
Marck
Tom.b
Starting Member
Starting Member
Posts: 11
Joined: Thu Aug 12, 2010 8:48 am

Re: Powerlink2 compatible with Powermax Pro 5.2.08 or higher

Post by Tom.b »

I have the same problem with my hardware version of my powermax pro system and powerlink 2 compatibility

I think i am going for this solution as i mentioned in my topic. Then you can also use your smartphone for your alarm system.

http://www.hashop.nl/a-22852961/control ... -vera-lite
in combination with
http://code.mios.com/trac/mios_visonic-powermax#
Post Reply

Return to “Visonic Alarm systems”