Dear all,
I am thinking about replacing my alarmsystem wit visonic securitysystems. However i want to use the sensors in homeseer and have the abbility to arm and disarm from homeseer.
What are my options and what do. Need?
I read about the waakzaamwonen interface and plugin, but is it also possible to inpteace the powerlink interface with a plugin or maybe directly via rs232? And are my wishes possible and what do i need t do this.
Thanks for helping
Bart
Visonic and homeseer
Moderators: Rene, Willem4ever
-
- Advanced Member
- Posts: 515
- Joined: Tue May 31, 2011 6:44 pm
- Contact:
Visonic and homeseer
Software: HS3, HStouch, Plugwise , BLBackup, BLLatestImage, Zwave, JowiHUE, PHlocation, Netcam, Harmony Plugin, ThinkingCleaner, HSPhone, Eneco Toon Script, Pushover, Visonic Powermax LV Interface
(ON ESXI )on NUC
(ON ESXI )on NUC
Re: Visonic and homeseer
I don't think such plugin for direct Visonic exists, you can only use the Alphatronics interface (or the RFXCom one). NOTE: When you buy a Visonic, you need to buy a PowerMax, because a PowerMaster (G2) doesn't work with Alphatronics/RFXCom.
DomotiGa / Z-Wave / RFXCom / Visonic PowerMaster / Home Assistant / Zigbee2MQTT / DSMR Reader / Toon1 (rooted)
-
- Advanced Member
- Posts: 515
- Joined: Tue May 31, 2011 6:44 pm
- Contact:
Re: Visonic and homeseer
Thank alex
Is it also possible to arm and disarm the powermax with this interface?
Thanks
Is it also possible to arm and disarm the powermax with this interface?
Thanks
Software: HS3, HStouch, Plugwise , BLBackup, BLLatestImage, Zwave, JowiHUE, PHlocation, Netcam, Harmony Plugin, ThinkingCleaner, HSPhone, Eneco Toon Script, Pushover, Visonic Powermax LV Interface
(ON ESXI )on NUC
(ON ESXI )on NUC
Re: Visonic and homeseer
I have Visonic and Homeseer via RFXCOM. But I only capture the Visonic sensor information into Homeseer. I don't control Visonic via Homeseer.
I seem to recall it was possible or at least many attempts were made by some the experts in this forum.
I'm afraid you will have to read all the sticky postings in the VIsonic-Homeseer section. I think it is buried in there somewhere....
Olof
I seem to recall it was possible or at least many attempts were made by some the experts in this forum.
I'm afraid you will have to read all the sticky postings in the VIsonic-Homeseer section. I think it is buried in there somewhere....
Olof
Re: Visonic and homeseer
Look here: http://www.domoticaforum.eu/viewforum.php?f=72&start=0
Based on http://www.domoticaforum.eu/viewtopic.php?f=68&t=6581 you should be able to control a Visonic Powermax.
I've even made a small interface on my smartphone for it:
Based on http://www.domoticaforum.eu/viewtopic.php?f=68&t=6581 you should be able to control a Visonic Powermax.
I've even made a small interface on my smartphone for it:
-
- Advanced Member
- Posts: 515
- Joined: Tue May 31, 2011 6:44 pm
- Contact:
Re: Visonic and homeseer
My visionic has arrived (thnx TANE). Now it time to hookup the serial connection (hopefully direct on the 10 pins header) and start playing with the programmer software and the descibed protocol. However there is also a homesee plugin made by rene. But cant get in contact with him
thanks for your support
Bart
thanks for your support
Bart
Software: HS3, HStouch, Plugwise , BLBackup, BLLatestImage, Zwave, JowiHUE, PHlocation, Netcam, Harmony Plugin, ThinkingCleaner, HSPhone, Eneco Toon Script, Pushover, Visonic Powermax LV Interface
(ON ESXI )on NUC
(ON ESXI )on NUC