Buva Boxstream 0-10v control

Pop your questions regarding Home automation Domotica hardware here.....
Post Reply
damylen
Starting Member
Starting Member
Posts: 1
Joined: Wed Dec 23, 2015 10:44 am

Buva Boxstream 0-10v control

Post by damylen »

Hi,

I talked to the people from Buva and they told me that I could control my Buva Boxstream using a 0-10v input (0=off, 10=full power). If you open the box there is also a 15 output on the device. I'm looking for a solution with a 0-10v output. I have a z-wave network, so that would be my preferred solution, but an arduino/rpi, might also work. I have been looking around but I only found a fibaro with a 0-10v input and I couldn't find any arduino shields.

Any suggestions?
Arnoud
User avatar
simjoc
Member
Member
Posts: 210
Joined: Sat Dec 27, 2008 5:59 pm
Location: Netherlands

Re: Buva Boxstream 0-10v control

Post by simjoc »

Post Reply

Return to “Questions & Discussions Forum”