CO2 Sensors

Pop your questions regarding Home automation Domotica hardware here.....
Bwired
Administrator
Administrator
Posts: 4704
Joined: Sat Mar 25, 2006 1:07 am
Location: Netherlands
Contact:

Re: CO2 Sensors

Post by Bwired »

looks good :)
keep us posted....
vlast3k
Starting Member
Starting Member
Posts: 31
Joined: Fri Jan 08, 2016 3:45 pm

Re: CO2 Sensors

Post by vlast3k »

just a quick status update: i had expected the that today i would get the PCBs for the two types of devices. Unfortunately today they told me that my order is going to be delayed by one week :(
At least as a bonus - this means that i will have time to add also support for MQTT, so the new Firmware will contain it out-of-the-box and no updates will be necessary.

Sorry for this up to now the guys that do the pcb assembly were reliable, but unfortunately it seems like if you order just several dozens PCBs, you get on the waiting list :)
User avatar
esschenk
Member
Member
Posts: 426
Joined: Sun Feb 17, 2008 10:34 pm
Location: Netherlands
Contact:

Re: CO2 Sensors

Post by esschenk »

Hello,

I have received my co2 sensor today. The Wi-Fi connection is working.
Iam new to Mqtt so that’s coming later.
I want to display it with http.
But I can’t get it to work
I have used the example in the config app.
http://192.168.1.16:2234/myservice?co2=%s&id=vAir
When I used this in my browser nothing is come up.
What I’m forgetting.
Also in the display its shows no TS key!!!


Thanks inn advanced

Ed
richard naninck
Member
Member
Posts: 123
Joined: Sun Nov 21, 2010 9:53 pm

Re: CO2 Sensors

Post by richard naninck »

Received mine last firday. Been busy with them all Friday evening and saterday. The Chrome app was not updated yet because the sensors were delivered a bit quicker than expected :D
After Vlad updated the app and after a few reboots I got my sensors connected via USB.
Set the Wifi and inputted my http string to get it to work.
Now waiting on new firmware because the Interval Time and Threshold data are not stored and therefore reset to default after a reboot of the sensor. Also I would like to see the LED turned off because it is too bright in my bedroom.
Not all sensors were working properly so I returned a few. This is a soldering problem which only occured a few hours after initial testing. The sensors will be renewed by Vlad.

As for your question:
If http://192.168.1.16:2234/myservice?co2=%s&id=vAir is what you entered and you are looking in your browser for results, I don't think you will get it to work. You need somekind of php or vbs script which parses the data after the ?
So if you have a simple webserver like mongoose and you have an index.php which parses the values you should address that IP with the PORT that mongoose is listening to executing index.php.
http://yourip:yourport/index.php?%s
In this case index.php will receive the CO2 value. If you have multiple sensors, sending an ID is preferred.
http://yourip:yourport/index.php?co2=%s&ID=yourspecificID
In this case index.php would look for the values splitted by & and thereafter splitted by =.
So co2= (CO2 Value) .. ID= (your id)

If the above makes no sense, than you need to get some other basics first..

Good luck
vlast3k
Starting Member
Starting Member
Posts: 31
Joined: Fri Jan 08, 2016 3:45 pm

Re: CO2 Sensors

Post by vlast3k »

esschenk wrote: I have used the example in the config app.
http://192.168.1.16:2234/myservice?co2=%s&id=vAir
When I used this in my browser nothing is come up.
The device does not support inbound connections - that is - it will not act as a web server. It rather uploads data either to some online Service - either local or public via HTTP or MQTT.
In case you do not have a local server that can gather the data (e.g. as explained by Richard), the simplest way to collect data is to create an account in Thingspeak and configure the device to upload data there
https://github.com/vlast3k/simple-co2-m ... irst-Steps

"No TS Key" means that there is no Thingspeak key. This has remained from the time when only Thingspeak was supported. It is on my list to fix it so that in case there is local server configured - this one is not shown.
User avatar
esschenk
Member
Member
Posts: 426
Joined: Sun Feb 17, 2008 10:34 pm
Location: Netherlands
Contact:

Re: CO2 Sensors

Post by esschenk »

Hello,

Ok i understand the working now from the sensor.
I will have a look to it.
I have a local webserver on my Nas .
so i try to get it to work

Thanks Both

Ed
Sparkman
Starting Member
Starting Member
Posts: 29
Joined: Wed Sep 09, 2015 5:57 am

Re: CO2 Sensors

Post by Sparkman »

Hi Ed, my understanding is that you use HS, so you should be able to use its webserver. You might be able to update a device value directly using the json or ascii command syntax that HS3 now supports. I'm looking at buying one of these sensors as well and using it that way.

Cheers
Al
User avatar
esschenk
Member
Member
Posts: 426
Joined: Sun Feb 17, 2008 10:34 pm
Location: Netherlands
Contact:

Re: CO2 Sensors

Post by esschenk »

Hello,

Ok, only my program skills are not so good.
So I look in to another way to put the sensor output in to Homeseer.

Thanks for repley

Ed
vlast3k
Starting Member
Starting Member
Posts: 31
Joined: Fri Jan 08, 2016 3:45 pm

Re: CO2 Sensors

Post by vlast3k »

I finally got some time to setup a simple Web Store on my hosting account.
For future orders you can use the site

http://shop.vair-monitor.com

And coupon code: VTHINGS_5, for 5% discount as promised

Of course you can also send me a private message here and transfer the money over paypal
Last edited by vlast3k on Mon Oct 17, 2016 11:50 am, edited 2 times in total.
Bwired
Administrator
Administrator
Posts: 4704
Joined: Sat Mar 25, 2006 1:07 am
Location: Netherlands
Contact:

Re: CO2 Sensors

Post by Bwired »

I Updated the firmware and now my C02 sensors are using MQTT :)
mqtt1.jpg
mqtt1.jpg (133.52 KiB) Viewed 12041 times
richard naninck
Member
Member
Posts: 123
Joined: Sun Nov 21, 2010 9:53 pm

Re: CO2 Sensors

Post by richard naninck »

I see the CO2 level rising... Is that from the excitement :D
Bwired
Administrator
Administrator
Posts: 4704
Joined: Sat Mar 25, 2006 1:07 am
Location: Netherlands
Contact:

Re: CO2 Sensors

Post by Bwired »

yes :P
Bwired
Administrator
Administrator
Posts: 4704
Joined: Sat Mar 25, 2006 1:07 am
Location: Netherlands
Contact:

Re: CO2 Sensors

Post by Bwired »

now I want a good wifi LUX sensor....
AshaiRey
Senior Member
Senior Member
Posts: 1310
Joined: Mon Feb 02, 2009 5:27 pm
Location: Netherlands
Contact:

Re: CO2 Sensors

Post by AshaiRey »

A question to justify the purchase of one :D
I what situation do you use one of these?
I mean, in a modern house there is no open flame anymore. The only location that could be a hazard here is the CV unit that hangs in the attic and has an close air connection to the outside. Do i miss something else?
Bram
richard naninck
Member
Member
Posts: 123
Joined: Sun Nov 21, 2010 9:53 pm

Re: CO2 Sensors

Post by richard naninck »

Yep you are talking about CO and this sensor is for CO2 meaning clean air
Post Reply

Return to “Questions & Discussions Forum”