CO2 Sensors
Re: CO2 Sensors
Aaahhhaa!
Till now i just didn't notice the 2 in CO2
Thanx for pointing this out to me.
Till now i just didn't notice the 2 in CO2
Thanx for pointing this out to me.
Bram
Re: CO2 Sensors
Hi Ed,esschenk wrote:Hello,
Ok, only my program skills are not so good.
So I look in to another way to put the sensor output in to Homeseer.
Thanks for repley
Ed
In case you don't have yours working yet, I have received my sensor and was able to get its values into HomeSeer using a JSON command. See here for more details: http://board.homeseer.com/showthread.ph ... ost1238267.
Cheers
Al
Re: CO2 Sensors
Nonetheless, I would welcome a similar CO sensor as well. Or a combined CO/CO2 sensor?AshaiRey wrote:Aaahhhaa!
Till now i just didn't notice the 2 in CO2
Thanx for pointing this out to me.
Re: CO2 Sensors
Hi Al,
Thanks for the example for Json.
But iam a, no no with this kind of stuf.
Can you explane how i can get this in Homeseer.
What i have done so far.
The Wifi connection is working.
OK
setWifiAlquinxxxxxxx
Connecting to: "Alquin", "xxxxxxx"
received:OK
In the sensor i have set the url to.
http://192.168.1.11:2234/myservice?co2=%s&id=vAir
How can i get the Json command in Homeseer!!.
Thanks for the Explanation.
Ed
Thanks for the example for Json.
But iam a, no no with this kind of stuf.
Can you explane how i can get this in Homeseer.
What i have done so far.
The Wifi connection is working.
OK
setWifiAlquinxxxxxxx
Connecting to: "Alquin", "xxxxxxx"
received:OK
In the sensor i have set the url to.
http://192.168.1.11:2234/myservice?co2=%s&id=vAir
How can i get the Json command in Homeseer!!.
Thanks for the Explanation.
Ed
Re: CO2 Sensors
I did not yet find the json commands for HS3, however i did find some example for domoticz
https://www.domoticz.com/forum/viewtopi ... 860#p81138
However i found out this
https://www.domoticz.com/forum/viewtopi ... 860#p81138
However i found out this
Code: Select all
htpp://ipadresss:port/JSON?request=controldevicebyvalue&ref=3570&value=%s (3570 is the device id of your virtual device)
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
Re: CO2 Sensors
i have also created a small page on configuring it with domoticz, if this would help...
https://github.com/vlast3k/simple-co2-m ... ntegration
https://github.com/vlast3k/simple-co2-m ... ntegration
Re: CO2 Sensors
Hello,
Ok, i understand the http:
But how can I read this in Homeseer.
Must I make a script or a event to read the URL!!!
Sorry but I have nothing done with Json.
And I cant find any examples in The Help file from Homeseer.
Thanks in advanced
Ed
Ok, i understand the http:
But how can I read this in Homeseer.
Must I make a script or a event to read the URL!!!
Sorry but I have nothing done with Json.
And I cant find any examples in The Help file from Homeseer.
Thanks in advanced
Ed
Re: CO2 Sensors
- Create a virtual device in HomeSeer (http://ip:port/deviceutility and press the green + in the rightside upper corner)
- Remember the Reference ID (for example 1036)
- Use this link in your webbrowser to test (htpp://ipadresss:port/JSON?request=controldevicebyvalue&ref=1036&value=15252
- Check the device value in HomeSeer (it should be 15252)
- If it is working use this link in your CO2 device (htpp://ipadresss:port/JSON?request=controldevicebyvalue&ref=1036&value=%s
Note: I did not get it working yet
Is switching between on and off but i cannot enter en custom value (yet)
- Remember the Reference ID (for example 1036)
- Use this link in your webbrowser to test (htpp://ipadresss:port/JSON?request=controldevicebyvalue&ref=1036&value=15252
- Check the device value in HomeSeer (it should be 15252)
- If it is working use this link in your CO2 device (htpp://ipadresss:port/JSON?request=controldevicebyvalue&ref=1036&value=%s
Note: I did not get it working yet
Code: Select all
192.168.110.35:8080/JSON?request=controldevicebyvalue&ref=762&value=0
192.168.110.35:8080/JSON?request=controldevicebyvalue&ref=762&value=100
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
Re: CO2 Sensors
I use Device string for custom values. I can't remember why. But your problem could be the reason.
Re: CO2 Sensors
mhn wrote:I use Device string for custom values. I can't remember why. But your problem could be the reason.
Could you give me "your url" to understand the issue ?
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
Re: CO2 Sensors
This is all correct, but you need to configure the Status Text portion of the Status Graphics tab similar to what I have shown in the thread on the HS board.raymonvdm wrote:- Create a virtual device in HomeSeer (http://ip:port/deviceutility and press the green + in the rightside upper corner)
- Remember the Reference ID (for example 1036)
- Use this link in your webbrowser to test (htpp://ipadresss:port/JSON?request=controldevicebyvalue&ref=1036&value=15252
- Check the device value in HomeSeer (it should be 15252)
- If it is working use this link in your CO2 device (htpp://ipadresss:port/JSON?request=controldevicebyvalue&ref=1036&value=%s
Note: I did not get it working yet
Is switching between on and off but i cannot enter en custom value (yet)Code: Select all
192.168.110.35:8080/JSON?request=controldevicebyvalue&ref=762&value=0 192.168.110.35:8080/JSON?request=controldevicebyvalue&ref=762&value=100
Cheers
Al
Re: CO2 Sensors
Aha found it, and it is working. To bad that you cannot make it a status only device (prevent control using app or webinterface)
http://board.homeseer.com/showpost.php? ... ostcount=2
http://board.homeseer.com/showpost.php? ... ostcount=2
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
Re: CO2 Sensors
You can use values if you add All possible values to the device in hs. Otherwise you het An error. I prefere to use the value instead of string for numbers. But you have to add the possible values (in a range)
groeten,
Harry
Harry
Re: CO2 Sensors
Yes, unfortunately JSON does not work with status only device, but it's possible to create a simple ASP page instead of using JSON and then pass the value that way.raymonvdm wrote:Aha found it, and it is working. To bad that you cannot make it a status only device (prevent control using app or webinterface)
http://board.homeseer.com/showpost.php? ... ostcount=2
Cheers
Al