set correct time in domoticz [SOLVED]

Pop your questions regarding Home automation Domotica hardware here.....
Post Reply
nawikre
Member
Member
Posts: 192
Joined: Wed Jan 27, 2010 10:53 pm
Location: Eibergen
Contact:

set correct time in domoticz [SOLVED]

Post by nawikre »

Hi there,

i am busy with my domoticz configuration and the time is not correct. The lang/longtitude is correct filled in for my location, but still the time is not correct. It is set to 2 hours earlyer.
What can i do next???
Last edited by nawikre on Sun May 08, 2016 10:53 am, edited 1 time in total.
greetz,

Iwan
User avatar
Fantic
Member
Member
Posts: 201
Joined: Sat Feb 21, 2009 2:11 pm
Location: Loenen, UT, Netherlands
Contact:

Re: set correct time in domoticz

Post by Fantic »

you need to make sure the OS timezone and time is set correctly, so when running on a PI go into raspi-config and set the timezone correct and make sure NTP is set correctly.
Regards, Maarten.
Never let a computer know you're in a hurry.
nawikre
Member
Member
Posts: 192
Joined: Wed Jan 27, 2010 10:53 pm
Location: Eibergen
Contact:

Re: set correct time in domoticz

Post by nawikre »

This was the direction i needed. Everything was fine.

Startd putty and logged in with user: pi and password: raspberry.
i typed in sudo dpkg-reconfigure tzdata . A small program started where i just needed to select my region, and city and voila...everything was set.

Thanks Fantic for pointing me in the right direction.
greetz,

Iwan
Post Reply

Return to “Questions & Discussions Forum”