12.1.1 EUSART ASYNCHRONOUS
The EUSART transmitter block diagram is shown in
Figure 12-1. The heart of the transmitter is the serial
Transmit Shift Register (TSR), which is not directly
accessible by software. The TSR obtains its data from
the transmit buffer, which is the TXREG register.
18.104.22.168 Enabling the Transmitter
The EUSART transmitter is enabled for asynchronous
operations by configuring the following three control
• TXEN = 1
• SYNC = 0
• SPEN = 1
All other EUSART control bits are assumed to be in
their default state.
Thank you for your email, unfortunately we do not have a date yet as to when this will be available, please keep checking our website http://www.staywell.co.uk as it will be announced on there.
Julie Fazakerley | Customer Care Specialist
UK FREEPHONE 0800 046 1414
EU | 00 800 18 18 20 20 / +44 (0) 118 963 9924
Same here. I did not get a cat-door yet, because I do not (yet) want to wreck the door (make a big hole in it to place the cat-door there). My cats have to ask to get outside or inside for now and that seems to work, on occasion locking one or both out for a few hours when there is noone to let them in again.wwolkers wrote:I've been looking into these catdoors also, and found 2 so far, the PetPorte, which is around 145 euros, and the SureFlap, which is around 90 euros. Both work with the chip which every cat should have by now.
Users browsing this forum: No registered users and 4 guests