Netcom 813 / RS232 / male & female

Pop your questions regarding Home automation Domotica hardware here.....
Post Reply
Edwin2008
Advanced Member
Advanced Member
Posts: 721
Joined: Fri Nov 28, 2008 4:14 pm
Location: Netherlands

Netcom 813 / RS232 / male & female

Post by Edwin2008 »

finally after a long period i found time to make an effort to get the netcom working.
First goal was to control the visonic. Whatever i did i did not get it working and then suddenly a lightwave struck.
The DB9 connector on both sides (netcom & visonic) are male. Would that mean i have to cross pin 2 & 3 instead of just a F/M gender => YES

Next problem to solve is why i can't open port 1 to 4 on the netcom. I noticed in the netcom manager that there is no TCP control port filled in, so i guess it has to do something with that.
Anyone know what to fill in?
** edwin **
Post Reply

Return to “Questions & Discussions Forum”