WDT Reset! OTGW 4.2.5

Forum about Opentherm, Hvac, House heating, Boilers

Moderator: hvxl

Post Reply
sincze
Starting Member
Starting Member
Posts: 47
Joined: Sat Jun 14, 2014 7:18 pm
Location: Breda

WDT Reset! OTGW 4.2.5

Post by sincze »

I've been reading through the forum about this message "WDT Reset!".

domoticaforum.eu/viewtopic.php?f=75&amp ... wdt#p71966
The PIC used in the gateway has 4 types of reset: Power on reset, External reset, Brown-out reset, and Watchdog timer (WDT) reset. In case a WDT reset happens (due to a firmware bug), the gateway will report "WDT reset!". I didn't put in the code that would be needed to differentiate between the other reset types.
domoticaforum.eu/viewtopic.php?f=75&amp ... set#p60738

My Gateway stopped working at 02:58:38 this morning.
This forum tells me it is a watchdog error regarding a firmware issue.

Anything I should monitor to see if we can help the developer solve the issue?
I had some problems with my OTGW before, however after changing the wiring it does run as it should :D
Attachments
WDT Reset
WDT Reset
WDT_Reset.JPG (11.78 KiB) Viewed 6208 times
sincze
Starting Member
Starting Member
Posts: 47
Joined: Sat Jun 14, 2014 7:18 pm
Location: Breda

Re: WDT Reset! OTGW 4.2.5

Post by sincze »

Hi Moderator.

Can this post be moved to the appropriate sub-Forum (Opentherm Gateway):
http://www.domoticaforum.eu/viewforum.php?f=75

Sorry for inconvenience. :oops:
Post Reply

Return to “Hvac, Heating Opentherm Forum”