OpenTherm protocol PDF document

Forum about Opentherm, Hvac, House heating, Boilers

Moderator: hvxl

OpenTherm protocol PDF document

Postby Ard M » Tue Jan 06, 2009 5:18 pm

[:D] Here they are the Open-therm protocol commands, good luck with it.

domoticaforum.eu/uploaded/Ard%20M/Opent ... 20v2-2.pdf
Ard M
Starting Member
Starting Member
 
Posts: 1
Joined: January 2009
Location: Netherlands

OpenTherm protocol PDF document

Postby Bwired » Tue Jan 06, 2009 5:30 pm

Hi Ard,
And the luck we need :-)
thanks for the topic, but these commands won't help very much.
You need the complete protocol to make it work!
User avatar
Bwired
Administrator
Administrator
 
Posts: 5301
Joined: March 2006
Location: Netherlands

OpenTherm protocol PDF document

Postby MindBender » Tue Jan 06, 2009 6:19 pm

That would be GREAT to have!
MindBender
Advanced Member
Advanced Member
 
Posts: 637
Joined: April 2006
Location: Netherlands

OpenTherm protocol PDF document

Postby Snelvuur » Tue Jan 06, 2009 6:33 pm

If you send it to pieter, he can put it on the files section. Or me for that matter..

// Erik (binkey.nl)
User avatar
Snelvuur
Forum Moderator
Forum Moderator
 
Posts: 3155
Joined: April 2007
Location: Netherlands

OpenTherm protocol PDF document

Postby Andro » Tue Jan 06, 2009 7:19 pm

Yes.. would be nice to have a RFXcom receiver/transmitter that could decode this protocol and put it into homeseer. If I look at my thermostat what is possible than I has a lot of possibilities. I'll just keep on dreaming ;-)
Andro
Member
Member
 
Posts: 105
Joined: August 2008
Location: Netherlands

OpenTherm protocol PDF document

Postby Bwired » Tue Jan 06, 2009 7:57 pm

Hi Ard,
I updated your first topic and added the Opentherm protocol version 2.2 PDF document.
Thanks for the specifications, this will help a lot with opening up opentherm!

@erik: can you put it in the filesection?
User avatar
Bwired
Administrator
Administrator
 
Posts: 5301
Joined: March 2006
Location: Netherlands

OpenTherm protocol PDF document

Postby Snelvuur » Tue Jan 06, 2009 8:24 pm

http://files.binkey.nl/Manuals/Opentherm/ its now there too.

// Erik (binkey.nl)
User avatar
Snelvuur
Forum Moderator
Forum Moderator
 
Posts: 3155
Joined: April 2007
Location: Netherlands

OpenTherm protocol PDF document

Postby MindBender » Wed Jan 07, 2009 9:47 am

Or you can use a Remeha GateWay; I'm still curious to know if it works with 3rd party OpenTherm boilers and thermostats too.
MindBender
Advanced Member
Advanced Member
 
Posts: 637
Joined: April 2006
Location: Netherlands

OpenTherm protocol PDF document

Postby Andro » Wed Jan 07, 2009 10:34 am

@MindBender: I read up on that Remeha gateway. It looks very interesting and I would be willing to use it. But from what I understand it only works with a Remeha thermostat and uses it own software. I was hoping (hint hint hint) that maybe RFXcom or another company would make such a gate themselves for reading/writing on that protocol. I think it would be great to have this integrated in homeseer. Also I would be willing to use more devices on that protocol (like a air conditioning) if it would all work. I also think it would really sell btw, because in these times most of us want to control their heating in a more advanced way.

Since I can't program and have no technical skills whatsoever I will have to revert to the 'teleprogram' option of my chronoterm. Doesn't mean I can't dream about nice things in the future.

Ronald
Andro
Member
Member
 
Posts: 105
Joined: August 2008
Location: Netherlands

OpenTherm protocol PDF document

Postby wwolkers » Wed Jan 07, 2009 11:53 am

Elektuur had an article about opentherm a while ago.

from their site:

http://www.elektor.nl/artikelen-als-pdf ... 8315.lynkx

Opentherm-monitor

Published in Elektor number 453, juli 2001

I still have it somewhere... built it, only to find out that opentherm != opentherm :P
wwolkers
Member
Member
 
Posts: 273
Joined: September 2008
Location: Netherlands

OpenTherm protocol PDF document

Postby Bwired » Wed Jan 07, 2009 1:05 pm

Perhaps with the above opentherm protocol you can get it to work!
I have the circuitboard as well but was not able to get it work with the closedtherm protocol :-)
this is the schematic
domoticaforum.eu/uploaded/bwired/Open-T ... ostaat.pdf
User avatar
Bwired
Administrator
Administrator
 
Posts: 5301
Joined: March 2006
Location: Netherlands

OpenTherm protocol PDF document

Postby Lempens » Wed Jan 07, 2009 3:25 pm

I have also the circuit board. But I stopped at decoding the Manchester protocol. I only receive 001100011000000011001000 and so many pages full.

I had also contacted Elektor, but the person who has designed it left, and nobody else knew something about it. And the don't have any software sample anymore.
Lempens
Member
Member
 
Posts: 265
Joined: December 2007
Location: Netherlands

OpenTherm protocol PDF document

Postby Snelvuur » Wed Jan 07, 2009 3:49 pm

I found some other documents too though, i've placed them at http://files.binkey.nl/Manuals/Opentherm/ , see if it has any value.

// Erik (binkey.nl)
User avatar
Snelvuur
Forum Moderator
Forum Moderator
 
Posts: 3155
Joined: April 2007
Location: Netherlands

OpenTherm protocol PDF document

Postby RDNZL » Wed Jan 07, 2009 8:49 pm

I had found a document once from the designers of the Buderus (Nefit) micro controller, but can't find it anymore [}:)]

Still searching though...

Wait... what's this?
http://www.necoso.com/logbox.htm
User avatar
RDNZL
Forum Moderator
Forum Moderator
 
Posts: 973
Joined: September 2006
Location: Dordrecht, The Netherlands

OpenTherm protocol PDF document

Postby RDNZL » Wed Jan 07, 2009 9:04 pm

User avatar
RDNZL
Forum Moderator
Forum Moderator
 
Posts: 973
Joined: September 2006
Location: Dordrecht, The Netherlands

Next

Return to Hvac, Heating Opentherm Forum

Who is online

Users browsing this forum: No registered users and 1 guest