Monitoring Remeha devices

Forum about Opentherm, Hvac, House heating, Boilers

Moderator: hvxl

Re: Monitoring Remeha devices

Postby MindBender » Tue Mar 15, 2011 7:34 pm

Yes. This plugin allows you to control the setpoint and read the current temperatures. I supports a regular serial port and a NetMedia SitePlayer serial port over Ethernet. After testing is done, I will release a first version and I hope to add advanced configuration and monitoring features to later releases. It won't be a free plugin, though.
MindBender
Advanced Member
Advanced Member
 
Posts: 639
Joined: April 2006
Location: Netherlands

Re: Monitoring Remeha devices

Postby yjb » Tue Mar 15, 2011 7:55 pm

Will this plugin also support the gateway, or only the cable that connects to the heater itself?
yjb
Member
Member
 
Posts: 188
Joined: April 2009
Location: Venhuizen, Netherlands

Re: Monitoring Remeha devices

Postby MindBender » Tue Mar 15, 2011 8:23 pm

yjb wrote:Will this plugin also support the gateway, or only the cable that connects to the heater itself?

Just the gateway
MindBender
Advanced Member
Advanced Member
 
Posts: 639
Joined: April 2006
Location: Netherlands

Re: Monitoring Remeha devices

Postby MaikelK » Mon Oct 14, 2019 6:13 pm

Does anybody still has the links to this project?
I have an on/off relay on my Calenta and dont want to invest in a modulating relay for my Evohome.

I do like to know boiler % and the temperatures etc.

If i read this topic correctly this should be possible. But I cant open the links i get a bad gateway error.
MaikelK
Starting Member
Starting Member
 
Posts: 12
Joined: November 2018

Re: Monitoring Remeha devices

Postby MindBender » Thu Oct 17, 2019 9:15 am

Do you need a Gateway? I think I still have it laying around, because it was a bit of a pity to toss it out.
MindBender
Advanced Member
Advanced Member
 
Posts: 639
Joined: April 2006
Location: Netherlands

Re: Monitoring Remeha devices

Postby MaikelK » Thu Oct 17, 2019 9:27 am

I don’t need the gateway because then I would also need to control the boiler with opentherm, which is not a good option.

So if someone has the information of the links etc. it would be great!
MaikelK
Starting Member
Starting Member
 
Posts: 12
Joined: November 2018

Re: Monitoring Remeha devices

Postby MindBender » Thu Oct 17, 2019 10:19 am

No, you do not; The Gateway takes care of operating the boiler, using OpenTherm. You only need two instruct the GateWay to do things for you, protocol documented here:
http://www.nerdclub.nl/remeha_gateway/index.html
MindBender
Advanced Member
Advanced Member
 
Posts: 639
Joined: April 2006
Location: Netherlands

Re: Monitoring Remeha devices

Postby hvxl » Sat Oct 19, 2019 5:21 pm

MaikelK wrote:So if someone has the information of the links etc. it would be great!

The missing links have all been archived by the Wayback Machine.
Schelte
hvxl
Senior Member
Senior Member
 
Posts: 1213
Joined: June 2010

Previous

Return to Hvac, Heating Opentherm Forum

Who is online

Users browsing this forum: No registered users and 1 guest