Proliphix imt350 series

Forum about Opentherm, Hvac, House heating, Boilers

Moderator: hvxl

jakkes
Member
Member
Posts: 167
Joined: Sat Oct 10, 2009 2:09 pm
Location: Netherlands

Re: Proliphix imt350 series

Post by jakkes »

Would this type of thermostat work on my Nefit Smartline HR heater?
Now i have a Nefit Moduline 30 thermostat
Bwired
Administrator
Administrator
Posts: 4704
Joined: Sat Mar 25, 2006 1:07 am
Location: Netherlands
Contact:

Re: Proliphix imt350 series

Post by Bwired »

No it wont work, you need to put it on the potential free input
Agree, Nefit is the worst hvac to buy for Domotica, I have on :(
jakkes
Member
Member
Posts: 167
Joined: Sat Oct 10, 2009 2:09 pm
Location: Netherlands

Re: Proliphix imt350 series

Post by jakkes »

Any other options for a thermostat for my Nefit?
Bwired
Administrator
Administrator
Posts: 4704
Joined: Sat Mar 25, 2006 1:07 am
Location: Netherlands
Contact:

Re: Proliphix imt350 series

Post by Bwired »

I was not very clear :), it can work but you need to put it on a different connector on your Nefit Hvac.
Check if you have it
I have the proliphix on my Nefit smartline to
http://www.domoticaforum.eu/viewtopic.php?f=23&t=3961
labium
Advanced Member
Advanced Member
Posts: 512
Joined: Sat Feb 06, 2010 10:56 am
Location: netherlands

Re: Proliphix imt350 series

Post by labium »

i buy my proliphix thermostats at smarthome , they have much lower shipping costs then proliphix itself.

isnt there an easy way to ad an fahrenheid to celsius formula in the hs scripts.

labium
Digit
Global Moderator
Global Moderator
Posts: 3388
Joined: Sat Mar 25, 2006 10:23 am
Location: Netherlands
Contact:

Re: Proliphix imt350 series

Post by Digit »

Why do you (still) need that when the plugin will support Celsius soon. (read the other replies in this topic)
Cause I can't imagine using a Proliphix without having either the Plugin, or knowing the API.
Digit
Global Moderator
Global Moderator
Posts: 3388
Joined: Sat Mar 25, 2006 10:23 am
Location: Netherlands
Contact:

Re: Proliphix imt350 series

Post by Digit »

A little update on the Plugin I was working on. Yesterday I sent the IMT350 back to its owner (thanks Akatar!).
I added some additional code to the Plugin to make the humidity readings more accessible (everybody who owns a IMT series thermostat will want that) and now that this has been tested and working fine, I will return the code to Homeseer so it can be made available in the updater.
http://blog.hekkers.net/2011/02/13/prol ... -finished/
rances
Member
Member
Posts: 53
Joined: Thu Nov 18, 2010 9:08 pm

Re: Proliphix imt350 series

Post by rances »

Can someone tell me if imt350 will work with my HR heater AGPO-Ferroli MegaLux 6 with built in boiler.
I don't know where to look for compatibility. Perhaps someone can explain.

I'll order one too if it's going to work with HS and my heater. I'm also interested in sharing shipping costs...
Verkenner
Member
Member
Posts: 338
Joined: Tue May 27, 2008 6:14 pm
Location: Netherlands

HS-Proliphix works great with NT20e

Post by Verkenner »

Robert, the Proliphix plugin works great with the NT20e in Celcius.
Glad that the WEB-stat works in C-degrees now.
And Installing was a piece of cake !

Thanks a lot.
Verkenner
Best regards, Verkenner
Digit
Global Moderator
Global Moderator
Posts: 3388
Joined: Sat Mar 25, 2006 10:23 am
Location: Netherlands
Contact:

Re: Proliphix imt350 series

Post by Digit »

Thanks for the info, have fun with it! :)
Herbus
Member
Member
Posts: 363
Joined: Mon Mar 27, 2006 12:28 pm
Location: Netherlands

Post by Herbus »

I was ready for ordering a NT20 or IMT350. But they aren't on the site anymore. Send them an email but no response. Seems that I can't spend my money.....?
Verkenner
Member
Member
Posts: 338
Joined: Tue May 27, 2008 6:14 pm
Location: Netherlands

Proliphix at Smarthome

Post by Verkenner »

Herbus, you can spent your money here ;-)
http://www.smarthome.com/3053T/Programm ... 20e/p.aspx

RGRDS, Verkenner
Best regards, Verkenner
Bwired
Administrator
Administrator
Posts: 4704
Joined: Sat Mar 25, 2006 1:07 am
Location: Netherlands
Contact:

Re: Proliphix imt350 series

Post by Bwired »

I would not buy the NT20 if you go for new, go for the 350. But somehow they are hard to get.
I'm trying to figur out what is going on with Proliphix for a while now. Looks like they made a B2B deal or something like that.
Not selling to europe, not telling anything about the 350 model protocol. Trying to change some things in the protocol to close it up again, at least they think. The 350 model protocol is open again thanks to Digit and also supported in the Homeseer plugin available free at Homeseer. proliphix is also not reacting to my mails while I got 2 demo NT20 models last year.

Second hand NT20 check here
shop.ebay.nl/i.html?LH_AvailTo=146& ... =proliphix
http://www.bwired.nl Online Home, Domotica, Home Automation. Weblog. http://blog.bwired.nl
User avatar
Willem4ever
Global Moderator
Global Moderator
Posts: 805
Joined: Mon Oct 30, 2006 3:48 pm
Location: Uithoorn / Netherlands

Re: Proliphix imt350 series

Post by Willem4ever »

Are you sure this is the right link ?

edit: link adjusted by bwired
Bwired
Administrator
Administrator
Posts: 4704
Joined: Sat Mar 25, 2006 1:07 am
Location: Netherlands
Contact:

Re: Proliphix imt350 series

Post by Bwired »

My mistake, link updated
Post Reply

Return to “Hvac, Heating Opentherm Forum”