For my Remeha Calenta I have the iSense controller. The iSense has an external input which, when closed, sets the heating to a certain setpoint.
The problem I have is the fact that the iSense is on a wall in the living, without any power outlets nearby. Because I would like to use this external input
i need some sort of 433 device (kaku??) which is battery powered, and is able to close this external input. (simple 2 wire open-close)
Does anyone has an idea to create some sort of sollution for this? All the kaku devices I can find are powered by a outlet.
Regards
Control external input Heating
Moderator: hvxl
-
- Member
- Posts: 88
- Joined: Wed Oct 27, 2010 8:36 pm
Control external input Heating
___________________________________________________________________
iEase Home Control
iEase Home Control
Re: Control external input Heating
That's what I thought too; and maybe you can 'steal' the required power from the iSense, which gets the power from the Calenta..
Re: Control external input Heating
Arent there any spare wires in the cable from the iSense to the Calenta? Then you could use any relais near the Calenta ( like the fibaro zwave relais).
-
- Member
- Posts: 88
- Joined: Wed Oct 27, 2010 8:36 pm
Re: Control external input Heating
I believe there are some spare wires. It would be a good option using these from another location! Will check this out!
___________________________________________________________________
iEase Home Control
iEase Home Control