Firmware update last year(s)?

Forum about Smart meters for Energy, Gas and Water and all related
Post Reply
Phoenix
Starting Member
Starting Member
Posts: 48
Joined: Sun Apr 28, 2013 9:40 pm
Location: Netherlands (Deventer)
Contact:

Firmware update last year(s)?

Post by Phoenix »

When i started writing this post a year or several back: http://domoticx.com/p1-poort-slimme-met ... n-hardware , it seems the telegram of the P1 port (in this case a DSRM 2) has changed, i've tested it again today...some values are missing, like:

Code: Select all

0-0:17.0.0(999*A)
0-0:96.3.10(1)
0-1:24.4.0(1)
Have to look up wich info/values they represent....

Have you experienced the same?


2016-06 telegram
p1 arduino uitlezen 2016-06.png
p1 arduino uitlezen 2016-06.png (14.63 KiB) Viewed 5761 times
2013-2014 telegram
p1 arduino uitlezen.png
p1 arduino uitlezen.png (24.8 KiB) Viewed 5761 times
Huisautomatisering - Domotica - Elektronica - IT consulting - Software ontwikkeling - 3D printing - Maatwerk
Website: domoticx.nl / Webshop: domoticx.nl/webwinkel / Knowledge Center: http://domoticx.com
hvxl
Senior Member
Senior Member
Posts: 1959
Joined: Sat Jun 05, 2010 11:59 am
Contact:

Re: Firmware update last year(s)?

Post by hvxl »

I see the same thing with my DSMR 4 device. On March 27, 2015 those exact same parameters were reported (although in my case 0-0:17.0.0 said 999.9*kW). Today they're not there any more.
Schelte
Post Reply

Return to “Smart Metering Forum”