Enery meter : Actaris ACE300 optical readout

Forum about Smart meters for Energy, Gas and Water and all related
Bwired
Administrator
Administrator
Posts: 4704
Joined: Sat Mar 25, 2006 1:07 am
Location: Netherlands
Contact:

Re: Enery meter : Actaris ACE300 optical readout

Post by Bwired »

Thats good News!
Then the smart meter is also working on IR :-)
Hope you have decimals too
Robke
Starting Member
Starting Member
Posts: 22
Joined: Mon Apr 16, 2012 9:20 pm

Re: Enery meter : Actaris ACE300 optical readout

Post by Robke »

John wrote:Bwired, this is correct for the ISKRA MT171.
for the ISKRA MT171 first you need to send "/?!" to retreive the idenfification and program version.
Then an confirmation must be send using the following command ACK 050 CR LF.
After changing the baudrate to 9600 the meter will return the data. As the data is in HEX I have another challenge
Hello John,

Can you give me more details? (i have to same problems)
Please answere over here: http://www.domoticaforum.eu/viewtopic.php?f=71&t=7446

Thank you!
flybywire
Starting Member
Starting Member
Posts: 8
Joined: Sat Jan 10, 2009 2:20 am
Location: Netherlands

Re: Enery meter : Actaris ACE300 optical readout

Post by flybywire »

people,

Today i heared from enexis that the optical port on the actaris Ace3000 is not always enabled and that they cannot enable these features.
Did more people encountered this ?
Post Reply

Return to “Smart Metering Forum”