P1 port enabled on all new smartmeters?

Forum about Smart meters for Energy, Gas and Water and all related
Post Reply
CRaZee
Starting Member
Starting Member
Posts: 37
Joined: Sun Jan 23, 2011 12:52 pm

P1 port enabled on all new smartmeters?

Post by CRaZee »

I want to get new smartmeters installed, but Enexis can't tell me what brand or model I will get.
So, is it true that all smartmeters installed in 2014 in The Netherlands should have the P1 port enabled for user readout?
raymonvdm
Senior Member
Senior Member
Posts: 1153
Joined: Sun Dec 18, 2011 1:23 am

Re: P1 port enabled on all new smartmeters?

Post by raymonvdm »

Volgens mij is het tegenwoordig verplicht om deze meter beschikbaar te hebben

https://forum.eneco.nl/groene-stroom-wi ... ndex9.html
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
CRaZee
Starting Member
Starting Member
Posts: 37
Joined: Sun Jan 23, 2011 12:52 pm

Re: P1 port enabled on all new smartmeters?

Post by CRaZee »

ok, thanks.
I subscribed for a priority placement of the smart meters.
I'm curious about what brand I get, and if I can read the P1 port.
User avatar
sj3fk3
Member
Member
Posts: 119
Joined: Mon Apr 23, 2012 8:33 am
Location: Abcoude

Re: P1 port enabled on all new smartmeters?

Post by sj3fk3 »

CRaZee wrote:ok, thanks.
I subscribed for a priority placement of the smart meters.
I'm curious about what brand I get, and if I can read the P1 port.
The P1 port is user readable by design. You can also use a SaaS option like https://www.slimmemeterportal.nl/ (I use both)
Kind Regards,
Greg.
eDsuB
Starting Member
Starting Member
Posts: 33
Joined: Mon Jan 11, 2010 1:25 pm
Contact:

Re: P1 port enabled on all new smartmeters?

Post by eDsuB »

Be aware that by using a service like slimmemeterportal.nl you will:
1. only get 15 minute values
2. get values with at least one day delay
3. supply your energy readings to a 'overige dienstenaanbieder, ODA' (e.g. slimmemeterportal.nl). And since you're not paying for that product, you ARE the product.....
4. not have to install anything yourself

When using P1 you will:
1. get 10 sec values
2. get values in real-time (well, almost)
3. keep all data where you want it
4. have to install some hard and software yourself
Post Reply

Return to “Smart Metering Forum”