i ordered an OTGW with this w-lan dongle from here: http://www.opentherm-gateway.com/
The TP Link comes with preflashed open wrt. I brought it online and connected with my wlan. Now the doc says that i have to connect to port 1001 - i wonder what that it - this port is not open at all. Can anyone explain , what i have to do?
USB is connected:
Gateway connected via usb, ser2net seems to be running.[ 12.990000] usbserial: USB Serial support registered for pl2303
[ 13.020000] usb 1-1: pl2303 converter now attached to ttyUSB0
[ 197.850000] usb 1-1: USB disconnect, device number 2
[ 197.870000] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0
[ 200.180000] usb 1-1: new full-speed USB device number 3 using ehci-platform
[ 200.360000] usb 1-1: pl2303 converter now attached to ttyUSB0
When i connect to port 1001 the server closes connection after some seconds. (My OTWG is not connected to the boiler / controller yet)
Thanks