Update request for gateway source files
Posted: Wed Oct 14, 2015 1:40 pm
I want to change the default values for 'maximum central heating setpoint' and 'domestic hot water setpoint' in the firmware. I want to change this because when I disconnect the gateway from my computer, the thermostat shows the default values which are programmed in the firmware of the PIC16F88 again and not the values I’ve just changed with OT monitor (as long as I keep the OTGW connected to a computer, the values I gave in in OTGW are displayed on the thermostat).
But, the latest gateway.hex file is version 4.2.4 while the gateway sources file (otgw-4.2.zip) is version 4.2. Since I don’t want to lose the latest modifications to the software my question to Schelte is can you please update the source files to version 4.2.4 too?
Thanks in advance.
PS: I want to change ‘constant MAX_DHWSETPOINT=80’ to ‘constant MAX_DHWSETPOINT=65’ and ‘constant MAX_CHSETPOINT=90’ to ‘constant MAX_CHSETPOINT=70’
But, the latest gateway.hex file is version 4.2.4 while the gateway sources file (otgw-4.2.zip) is version 4.2. Since I don’t want to lose the latest modifications to the software my question to Schelte is can you please update the source files to version 4.2.4 too?
Thanks in advance.
PS: I want to change ‘constant MAX_DHWSETPOINT=80’ to ‘constant MAX_DHWSETPOINT=65’ and ‘constant MAX_CHSETPOINT=90’ to ‘constant MAX_CHSETPOINT=70’