OEM fault code 132

This Forum is about the Opentherm gateway (OTG) from Schelte

Moderator: hvxl

OEM fault code 132

Postby rpav » Wed Nov 18, 2015 10:34 pm

Hi folks,
I've seen OEM fault code 132 on the OTGW status page.
Anybody know what "OEM fault code 132" for Geminox THRi means?
Thanks!
rpav
Starting Member
Starting Member
 
Posts: 26
Joined: November 2015

Re: OEM fault code 132

Postby hvxl » Wed Nov 18, 2015 11:43 pm

According to the manual it means: Safety device activated. Check that shunt X10-03 is present and that the wires are properly connected.

Note that the OEM fault code is only relevant when the fault indication bit is on.
Schelte
hvxl
Senior Member
Senior Member
 
Posts: 1201
Joined: June 2010

Re: OEM fault code 132

Postby rpav » Fri Nov 20, 2015 3:55 pm

Thank you for reply.
Fault indication bit is not on, so I wll ignore all OEM fault code on status page (today I've seen OEM fault code 3)
But i try to find fault code in otlog log file, but can't see it. Is it loged to otlog file?
rpav
Starting Member
Starting Member
 
Posts: 26
Joined: November 2015

Re: OEM fault code 132

Postby hvxl » Fri Nov 20, 2015 9:15 pm

Given that otmonitor shows the OEM fault code, it must have received the message. That message will then also be logged.
Schelte
hvxl
Senior Member
Senior Member
 
Posts: 1201
Joined: June 2010


Return to Opentherm Gateway Forum

Who is online

Users browsing this forum: No registered users and 1 guest