OEM fault code 132

This Forum is about the Opentherm gateway (OTGW) from Schelte

Moderator: hvxl

Post Reply
rpav
Starting Member
Starting Member
Posts: 31
Joined: Sun Nov 15, 2015 8:55 pm

OEM fault code 132

Post by rpav »

Hi folks,
I've seen OEM fault code 132 on the OTGW status page.
Anybody know what "OEM fault code 132" for Geminox THRi means?
Thanks!
hvxl
Senior Member
Senior Member
Posts: 1965
Joined: Sat Jun 05, 2010 11:59 am
Contact:

Re: OEM fault code 132

Post by hvxl »

According to the manual it means: Safety device activated. Check that shunt X10-03 is present and that the wires are properly connected.

Note that the OEM fault code is only relevant when the fault indication bit is on.
Schelte
rpav
Starting Member
Starting Member
Posts: 31
Joined: Sun Nov 15, 2015 8:55 pm

Re: OEM fault code 132

Post by rpav »

Thank you for reply.
Fault indication bit is not on, so I wll ignore all OEM fault code on status page (today I've seen OEM fault code 3)
But i try to find fault code in otlog log file, but can't see it. Is it loged to otlog file?
hvxl
Senior Member
Senior Member
Posts: 1965
Joined: Sat Jun 05, 2010 11:59 am
Contact:

Re: OEM fault code 132

Post by hvxl »

Given that otmonitor shows the OEM fault code, it must have received the message. That message will then also be logged.
Schelte
Post Reply

Return to “Opentherm Gateway Forum”