Feature request: support for P1/S0/Pulses

This Forum is about the Opentherm gateway (OTGW) from Schelte

Moderator: hvxl

Post Reply
dirkx@webweaving.org
Starting Member
Starting Member
Posts: 14
Joined: Sat Jan 04, 2014 9:49 pm

Feature request: support for P1/S0/Pulses

Post by dirkx@webweaving.org »

It may be nice; for some future version; to support the P1 bus of `smart' meters (http://www.bwired.nl/weblog.asp?id=456) - or very simple pulse counting as commonly called 'S0' (https://de.wikipedia.org/wiki/S0-Schnittstelle).

And then report this as a special message.
hvxl
Senior Member
Senior Member
Posts: 1965
Joined: Sat Jun 05, 2010 11:59 am
Contact:

Re: Feature request: support for P1/S0/Pulses

Post by hvxl »

There are only 179 unused program words left, and 6 bytes of RAM. That's never going to fit. Furthermore, I expect the gateway to be located nowhere near the smart meter in most homes.
Schelte
timoline
Starting Member
Starting Member
Posts: 34
Joined: Sat Nov 07, 2015 2:30 pm

Re: Feature request: support for P1/S0/Pulses

Post by timoline »

an otmonitor for a smartmeter (p1monitor).... ......would be very welcome

just one app for p1, no more python or other scripts to parse the p1 telegram....
Post Reply

Return to “Opentherm Gateway Forum”