MQTT topic controlsetpoint

This Forum is about the Opentherm gateway (OTG) from Schelte

Moderator: hvxl

MQTT topic controlsetpoint

Postby peter8wun » Mon Oct 17, 2016 2:07 pm

Hi,
Does anybody know if there is some documentation about the MQTT topics?

I like to set the controlesetpoint via MQTT but it seems that I do not use the right topic.

I can set the setpoint with topic “actions/otmonitor/setpoint” because I see in the log:
14:51:48.950020 Command (via MQTT): TT=2
14:51:48.967611 TT: 2.00

But when I use the topic “actions/otmonitor/controlsetpoint” I see no response in the log.
peter8wun
Starting Member
Starting Member
 
Posts: 1
Joined: October 2016

Re: MQTT topic controlsetpoint

Postby hvxl » Wed Oct 19, 2016 12:38 pm

You didn't use the right topic because that doesn't exist. OTmonitor currently only supports two action topics:
  • actions/otmonitor/setpoint
  • actions/otmonitor/outside
You can add others you need by modifying the mqttaction proc in mqtt.tcl.
Schelte
hvxl
Senior Member
Senior Member
 
Posts: 1223
Joined: June 2010


Return to Opentherm Gateway Forum

Who is online

Users browsing this forum: No registered users and 1 guest