MQTT topic controlsetpoint

This Forum is about the Opentherm gateway (OTGW) from Schelte

Moderator: hvxl

Post Reply
peter8wun
Starting Member
Starting Member
Posts: 1
Joined: Mon Oct 17, 2016 2:45 pm

MQTT topic controlsetpoint

Post by peter8wun »

Hi,
Does anybody know if there is some documentation about the MQTT topics?

I like to set the controlesetpoint via MQTT but it seems that I do not use the right topic.

I can set the setpoint with topic “actions/otmonitor/setpoint” because I see in the log:
14:51:48.950020 Command (via MQTT): TT=2
14:51:48.967611 TT: 2.00

But when I use the topic “actions/otmonitor/controlsetpoint” I see no response in the log.
hvxl
Senior Member
Senior Member
Posts: 1965
Joined: Sat Jun 05, 2010 11:59 am
Contact:

Re: MQTT topic controlsetpoint

Post by hvxl »

You didn't use the right topic because that doesn't exist. OTmonitor currently only supports two action topics:
  • actions/otmonitor/setpoint
  • actions/otmonitor/outside
You can add others you need by modifying the mqttaction proc in mqtt.tcl.
Schelte
Post Reply

Return to “Opentherm Gateway Forum”