DHW Setpoint not updated in PS=1 String
Posted: Mon Jan 02, 2017 3:20 pm
Boiler: Remeha Quinta 28C
Thermostat: iSense (v19. external input allowed)
With a manual of Domoticz command SW=62, I am able to change the Domestic Hot Water Setpoint to 62 degrees. This is in OTMonitor visible in both the 'Summary' and 'Status page'. However, in the PS=1 string, and therefore also in Domoticz, I still see the old setpoint, as set by the iSense: 59'C. The iSense itself is also still at 59. Please see the piece of the OT messages at the point where I did the manual / Domoticz override:
It looks like the PS=1 string of data is not updated with the new setpoint.
Is it normal that the iSense is not updated with the new DHW Setpoint? It does react well on changing the Thermostat Setpoint.
Thermostat: iSense (v19. external input allowed)
With a manual of Domoticz command SW=62, I am able to change the Domestic Hot Water Setpoint to 62 degrees. This is in OTMonitor visible in both the 'Summary' and 'Status page'. However, in the PS=1 string, and therefore also in Domoticz, I still see the old setpoint, as set by the iSense: 59'C. The iSense itself is also still at 59. Please see the piece of the OT messages at the point where I did the manual / Domoticz override:
Code: Select all
[b]13:14:05.441816 Command (via relay server, from 127.0.0.1:48214): SW=62.0
13:14:05.473613 SW: 62.00[/b]
13:14:05.503507 Command (via relay server, from 127.0.0.1:48214): PR=G
13:14:05.506578 Command (via relay server, from 127.0.0.1:48214): PR=I
13:14:05.510997 Command (via relay server, from 127.0.0.1:48214): PR=O
13:14:05.519177 Command (via relay server, from 127.0.0.1:48214): PS=1
13:14:05.545469 PR: G=00
13:14:05.572440 PR: I=11
13:14:05.595323 PR: O=N
13:14:05.621135 PS: 1
13:14:05.723893 00000000/00000000,6.90,00000001/00000001,100.00,0/0,17.50,0.00,0.00,18.33,22.00,0.00,3.80,21.00,75/20,45/0,[b]59.00[/b],0.00,23970,0,0,12150,30230,4482,1057,4629
13:14:05.734354 Command (via relay server, from 127.0.0.1:48214): PS=0
13:14:05.758500 PS: 0
13:14:05.834997 BC0000000 Read-Ack Status: 00000000 00000000
13:14:06.662679 T90010700 Write-Data Control setpoint: 7.00
13:14:06.841803 B50010700 Write-Ack Control setpoint: 7.00
13:14:07.664694 T00110000 Read-Data Relative modulation level: 0.00
13:14:07.844461 BC0110000 Read-Ack Relative modulation level: 0.00
13:14:08.669331 T80190000 Read-Data Boiler water temperature: 0.00
13:14:08.850636 BC0191600 Read-Ack Boiler water temperature: 22.00
13:14:09.675638 T90101180 Write-Data Room setpoint: 17.50
13:14:09.856790 B50101180 Write-Ack Room setpoint: 17.50
13:14:10.680807 T00000000 Read-Data Status: 00000000 00000000
13:14:10.863018 BC0000000 Read-Ack Status: 00000000 00000000
13:14:11.690923 T90010700 Write-Data Control setpoint: 7.00
13:14:11.867882 B50010700 Write-Ack Control setpoint: 7.00
13:14:12.785370 T00110000 Read-Data Relative modulation level: 0.00
13:14:12.877853 BC0110000 Read-Ack Relative modulation level: 0.00
13:14:13.857413 T80190000 Read-Data Boiler water temperature: 0.00
13:14:14.046559 BC0191600 Read-Ack Boiler water temperature: 22.00
13:14:14.705819 T1018124F Write-Data Room temperature: 18.31
13:14:14.886787 BD018124F Write-Ack Room temperature: 18.31
13:14:15.709942 T00000000 Read-Data Status: 00000000 00000000
13:14:15.890537 BC0000000 Read-Ack Status: 00000000 00000000
13:14:16.729307 T90010700 Write-Data Control setpoint: 7.00
13:14:16.896298 B50010700 Write-Ack Control setpoint: 7.00
13:14:17.721603 T00110000 Read-Data Relative modulation level: 0.00
13:14:17.902582 BC0110000 Read-Ack Relative modulation level: 0.00
13:14:18.727586 T80190000 Read-Data Boiler water temperature: 0.00
13:14:18.907351 BC0191600 Read-Ack Boiler water temperature: 22.00
13:14:19.732587 T00090000 Read-Data Remote override room setpoint: 0.00
13:14:19.744745 R90383E00 Write-Data DHW setpoint: 62.00
13:14:19.942502 B50383E00 Write-Ack DHW setpoint: 62.00
13:14:19.953080 AC0090000 Read-Ack Remote override room setpoint: 0.00
13:14:19.981372 Command (via relay server, from 127.0.0.1:48214): OT=3.8
13:14:20.009733 OT: 3.80
13:14:20.019365 Command (via relay server, from 127.0.0.1:48214): SC=13:14/1
13:14:20.022057 Command (via relay server, from 127.0.0.1:48214): PR=G
13:14:20.024761 Command (via relay server, from 127.0.0.1:48214): PR=I
13:14:20.027159 Command (via relay server, from 127.0.0.1:48214): PR=O
13:14:20.029996 Command (via relay server, from 127.0.0.1:48214): PS=1
13:14:20.053257 SC: 13:14/1
13:14:20.058061 PR: G=00
13:14:20.067003 PR: I=11
13:14:20.076638 PR: O=N
13:14:20.093104 PS: 1
13:14:20.252394 00000000/00000000,7.00,00000001/00000001,100.00,0/0,17.50,0.00,0.00,18.31,22.00,0.00,3.80,21.00,75/20,45/0,[b]59.00[/b],0.00,23970,0,0,12150,30230,4482,1057,4629
Is it normal that the iSense is not updated with the new DHW Setpoint? It does react well on changing the Thermostat Setpoint.