Hi there,
I've just started using the OTGW and everything works as it should be but after working for about a day the OTGW starts reporting all zero values (no errors). The PS=1 command reports all values 0. This does not solve with a GW=R command, I have to disconnect and reconnect the power to solve this. In this stage the OTGW is still responding on any commands given. Also sometimes after a while the gateway starts working again and then continues to work for a while until the same issue returns. With the diagnostics firmware all tests are ok as far as I can tell.
The thermostat I'm using is a Remeha ISense and the boiler is a Remeha Tzerra Plus.
Anyone an idea what could be the cause of this? Thanks.