Opentherm Gateway Voltage levels

This Forum is about the Opentherm gateway (OTG) from Schelte

Moderator: hvxl

Opentherm Gateway Voltage levels

Postby desatg » Wed Aug 23, 2017 11:13 am

Hello,
is there a way to obtain adjustable voltage levels on the boiler side (X2)?
Now I measure a low voltage of about 5V and a hign voltage of about 17.5V (when the thermostat connected to X1 is transmitting).
I would like to adjust these values, namely:
_ low voltage should be set between 0V and 8V
_ high voltage should be set between 15V and 18V

Thank you
All the best
desatg
Starting Member
Starting Member
 
Posts: 1
Joined: August 2017

Re: Opentherm Gateway Voltage levels

Postby hvxl » Sat Sep 23, 2017 9:58 am

I don't understand what you are trying to achieve. The voltages you reported already fall within the limits you specify.
But if you want to change the levels, you will have to use different values for D11 (low voltage level) and/or D10 (high voltage level).
Schelte
hvxl
Senior Member
Senior Member
 
Posts: 1026
Joined: June 2010


Return to Opentherm Gateway Forum

Who is online

Users browsing this forum: No registered users and 1 guest