serial settings otg version 1 b

This Forum is about the Opentherm gateway (OTG) from Schelte

Moderator: hvxl

serial settings otg version 1 b

Postby labium » Sat Oct 07, 2017 12:04 pm

i unpacked my assembled opentherm gateway ordered in 2012 , i cant get serial communication. . i use a digi port server ts4 with rj45 pin 4 to db9 pin 2 (red wire) pin 5 to pin 3 db9 ground (black) to chassis db9

digi ts4 port settings otg.PNG
digi serial port settings
digi ts4 port settings otg.PNG (16.47 KiB) Viewed 375 times



db9torj45 otg (Mobile).jpg
db9torj45 otg (Mobile).jpg (59.18 KiB) Viewed 374 times
labium
Member
Member
 
Posts: 470
Joined: February 2010
Location: netherlands

Re: serial settings otg version 1 b

Postby hvxl » Sat Oct 07, 2017 12:12 pm

The db9 chassis is not connected to anything. You have to connect ground to db9 pin 5.
Schelte
hvxl
Senior Member
Senior Member
 
Posts: 1026
Joined: June 2010

Re: serial settings otg version 1 b

Postby labium » Sat Oct 07, 2017 12:32 pm

i used this diagram

digi rj45 to db9 serial.PNG
voor de vertaling van db9 naar rj45
digi rj45 to db9 serial.PNG (97.78 KiB) Viewed 368 times


kleurcodering draden db9 rj45 converter.PNG
voor de betekenis van de kleuren van de draden
kleurcodering draden db9 rj45 converter.PNG (9.49 KiB) Viewed 367 times
labium
Member
Member
 
Posts: 470
Joined: February 2010
Location: netherlands

Re: serial settings otg version 1 b

Postby hvxl » Sat Oct 07, 2017 12:43 pm

So then connect rj45 pin 6 (SG, signal ground) to db9 pin 5.
Schelte
hvxl
Senior Member
Senior Member
 
Posts: 1026
Joined: June 2010

Re: serial settings otg version 1 b

Postby hvxl » Sat Oct 07, 2017 12:54 pm

I also believe you have the red and green wire the wrong way around. If I understand the pictures correctly, red is TxD from the digi port server. That should be connected to RxD of the OTGW, which is db9 pin 3. Green is RxD on the digi port server. That must be connected to TxD of the OTGW, db9 pin 2.
Schelte
hvxl
Senior Member
Senior Member
 
Posts: 1026
Joined: June 2010

Re: serial settings otg version 1 b

Postby labium » Sat Oct 07, 2017 5:26 pm

hvxl you are correct changing the red and green wire works with th yellow rj45 pin 6 wire in the db9 pin 5.

thanks
labium
Member
Member
 
Posts: 470
Joined: February 2010
Location: netherlands


Return to Opentherm Gateway Forum

Who is online

Users browsing this forum: No registered users and 1 guest