is remote control from OTG by code possible
Posted: Mon Feb 04, 2019 12:52 pm
Hi!
Is there a possibility to (programmaticly) remote control the OTG?
I know you can put manual input such as TT=25 to manual temperature set the thermostat setpoint @ 25 degree.
But is there also a programmaticly way to do such as we can set a value in Domoticz . Example:
https://domoticzIP:port/json.htm?type=command¶m=udevice&idx=IDX&nvalue=0&svalue=TEMP
re to https://www.domoticz.com/wiki/Domoticz_ ... 2Fhumidity
That way programmaticaly a setpoint could be manipulated.
KR
-Bart
Is there a possibility to (programmaticly) remote control the OTG?
I know you can put manual input such as TT=25 to manual temperature set the thermostat setpoint @ 25 degree.
But is there also a programmaticly way to do such as we can set a value in Domoticz . Example:
https://domoticzIP:port/json.htm?type=command¶m=udevice&idx=IDX&nvalue=0&svalue=TEMP
re to https://www.domoticz.com/wiki/Domoticz_ ... 2Fhumidity
That way programmaticaly a setpoint could be manipulated.
KR
-Bart