thank you for making this possible

This Forum is about the Opentherm gateway (OTGW) from Schelte

Moderator: hvxl

Post Reply
hjaeger77
Starting Member
Starting Member
Posts: 1
Joined: Sun Oct 27, 2019 5:04 pm

thank you for making this possible

Post by hjaeger77 »

Hi Ppl.

I just wanted to thank the folks who made this device. I ordered one from the dutch online shop and just set it up on my ancient Remeha Quinta 25 with a rematic thermostat. And its working quite nice. I can already read temps and status in my openhab setup. Thanks for providing your work to the internetwebz. Opensource Rocks!

Greetings from germany
hvxl
Senior Member
Senior Member
Posts: 1965
Joined: Sat Jun 05, 2010 11:59 am
Contact:

Re: thank you for making this possible

Post by hvxl »

It is so nice to hear from a satisfied user for a change. 8)
Schelte
mephix
Starting Member
Starting Member
Posts: 2
Joined: Wed Oct 03, 2018 7:09 pm

Re: thank you for making this possible

Post by mephix »

I've been using the OTGW for quite a while now.. first with Domoticz and since about 3 years with openHAB.

I've got the 'classic' module, ordered all the parts from the partslist and soldered it together. I've hooked it up to a Moxa NPort serial to ethernet converter and the combination of the two has proven to be incredibly stable. I haven't had any issues whatsoever in all these years.

So thank you Schelte for designing the OTGW and publishing your work free of charge. And know that it is enjoyed by so many people.

Greetings,
Arjen Korevaar
Post Reply

Return to “Opentherm Gateway Forum”