Error 03 but the thermostat controls correctly the boiler...
Posted: Thu Nov 28, 2019 7:34 pm
Hi All,
I don't understand what's happening now, everything was working properly until I wanted to switch my raspberry.
The gateway was working fine, and now, I see a lot of Error 03 coming in my logs.
Here's a full dump in pastebin : https://pastebin.com/w6u0d93k
Could you please advise ? I don't know what to do, I checked the tension in X1 and X2, and I've almost 7,5V (polarized). I checked also the PIC 1 on 5 and 14, I've 5v, but between 15 &ne 16 nothing.
The strange thing : Now with the Error 03, my thermostat is working well, meaning it controls the boiler in the correct way. Previouly (fighting with the GW, I was even not able to control anything while I was only seeing the boiler information, the thermostat was not processes while it was logged as connected...)
I can also view some of the information in the logs and catch correctly by otmonitor.
What should I do ? Thanks.
I don't understand what's happening now, everything was working properly until I wanted to switch my raspberry.
The gateway was working fine, and now, I see a lot of Error 03 coming in my logs.
Here's a full dump in pastebin : https://pastebin.com/w6u0d93k
Could you please advise ? I don't know what to do, I checked the tension in X1 and X2, and I've almost 7,5V (polarized). I checked also the PIC 1 on 5 and 14, I've 5v, but between 15 &ne 16 nothing.
The strange thing : Now with the Error 03, my thermostat is working well, meaning it controls the boiler in the correct way. Previouly (fighting with the GW, I was even not able to control anything while I was only seeing the boiler information, the thermostat was not processes while it was logged as connected...)
I can also view some of the information in the logs and catch correctly by otmonitor.
What should I do ? Thanks.