Stand alone

This Forum is about the Opentherm gateway (OTGW) from Schelte

Moderator: hvxl

Post Reply
Rokite66
Starting Member
Starting Member
Posts: 2
Joined: Fri Oct 23, 2020 12:43 pm

Stand alone

Post by Rokite66 »

Hi,

I have the gateway working on my Vaillant boiler. I have no thermostat and want to use the gateway in stand alone mode to control the boiler with HomeSeer. Currently I have a simple on/off thermostat made in HomeSeer together with a ZigBee switch. The CS command to control the boiler water temperature works fine but I want to implement a PID controller/loop or something similar to make it more efficient and have less large temperature swings. Can somebody point me in the right direction for a simple code example? I have inside temperature, outside temperature and requested temperature as input for the loop.

Any help is much appreciated!
Thanks!
benalla
Starting Member
Starting Member
Posts: 2
Joined: Sun Dec 12, 2021 2:45 pm

Re: Stand alone

Post by benalla »

Hi
Just found your post.
I have a Vaillant exClusief VHR 35C, want to use the opentherm gateway without a thermostat using HomeAssistant.
Did you manage to get ut all working?

Can you help me getting started?

Thanks in advance.
Post Reply

Return to “Opentherm Gateway Forum”