[Poll for interest] OpenTherm Gateway pcbs
Moderator: hvxl
[Poll for interest] OpenTherm Gateway pcbs
[Poll for interest] a limited number of OpenTherm Gateway printed circuit boards.
UPDATE: the original boards are all gone, but if there's enough interest, I'll be willing to have another batch made. See my posting below.
UPDATE 2: we've made it for the second batch. Topic closed for now, unless another 10 people jump in .
UPDATE 3: we've made it for the third batch. As there still seems to be additional interest, I'll start a fourth batch.
The board is discussed in this topic:
domoticaforum.eu/viewtopic.php?f=70& ... =60#p58086
The board itself is described at:
http://www.tclcode.com/opentherm/index.html#gateway
I wanted one myself and had to order 10 at the same time. These pcbs are blue with ENIG finish (= golden pads for good solderability):
Price: EUR 6,50 each + EUR 1,- shipping within NL.
Contact me by PM or reply to this post if you're interested.
The parts to complete the build can be ordered directly from Conrad:
tclcode.com/opentherm/schematic.html#pa ... l#partlist
UPDATE: the original boards are all gone, but if there's enough interest, I'll be willing to have another batch made. See my posting below.
UPDATE 2: we've made it for the second batch. Topic closed for now, unless another 10 people jump in .
UPDATE 3: we've made it for the third batch. As there still seems to be additional interest, I'll start a fourth batch.
The board is discussed in this topic:
domoticaforum.eu/viewtopic.php?f=70& ... =60#p58086
The board itself is described at:
http://www.tclcode.com/opentherm/index.html#gateway
I wanted one myself and had to order 10 at the same time. These pcbs are blue with ENIG finish (= golden pads for good solderability):
Price: EUR 6,50 each + EUR 1,- shipping within NL.
Contact me by PM or reply to this post if you're interested.
The parts to complete the build can be ordered directly from Conrad:
tclcode.com/opentherm/schematic.html#pa ... l#partlist
Last edited by Lennart on Wed Oct 10, 2012 8:08 am, edited 7 times in total.
Re: [Reserved] OpenTherm Gateway pcbs
Hi Lennart,
I would be very much interested, so if anyone isn`t buy one of the boards, you can count me in.
Greetz,
Pendul
I would be very much interested, so if anyone isn`t buy one of the boards, you can count me in.
Greetz,
Pendul
Re: [Reserved] OpenTherm Gateway pcbs
i'm interested a well
Re: [Reserved] OpenTherm Gateway pcbs
Ok, if there's enough interest, I'll be willing to order another batch of 10 boards. These will again be blue but with normal HASL finish (tinned pads).
Price will be EUR 6,50 again (+ EUR 1,- for shipping within NL). I'll place the order if we reach 7 members who pledge to pay for a board. Once we reach 7, it'll take about 4 weeks to get the boards.
So far, I have:
1 - Sanka
2 - Pendul
3 - gvdham
4 - Viper1970
5 - Herbus
6 - Willem4ever
7 - gjniewenhuijse
8 - Antoon
9 - Templar
10 - [Reserve board, in case of any problems]
Please send me a PM if you are certain that you want a board. And, also, please send me a PM if you're currently on the list and not interested anymore.
UPDATE: It looks we've made it! I'll order the boards.
Lennart
Price will be EUR 6,50 again (+ EUR 1,- for shipping within NL). I'll place the order if we reach 7 members who pledge to pay for a board. Once we reach 7, it'll take about 4 weeks to get the boards.
So far, I have:
1 - Sanka
2 - Pendul
3 - gvdham
4 - Viper1970
5 - Herbus
6 - Willem4ever
7 - gjniewenhuijse
8 - Antoon
9 - Templar
10 - [Reserve board, in case of any problems]
Please send me a PM if you are certain that you want a board. And, also, please send me a PM if you're currently on the list and not interested anymore.
UPDATE: It looks we've made it! I'll order the boards.
Lennart
Last edited by Lennart on Tue Oct 02, 2012 7:04 pm, edited 2 times in total.
Re: [Poll for interest] OpenTherm Gateway pcbs
I can not send you a pm (not enough messages for the moment), but I am still interested.
-
- Member
- Posts: 140
- Joined: Thu Jul 16, 2009 12:04 pm
- Location: Netherlands
Re: [Poll for interest] OpenTherm Gateway pcbs
Is it also possible to order a complete board (ready to use)? with components and programmed pic?
Re: [Poll for interest] OpenTherm Gateway pcbs
@gjniewenhuijse: you have a PM.
Re: [Sold] OpenTherm Gateway pcbs
Lennart, thanks for ordering, can't wait until it is delivered, until then, I guess I have to work on my old and probably rusty soldering techniques
Re: [Sold] OpenTherm Gateway pcbs
@Lennart: My pcb arrived in mint condition. Thanks for the quick service!
Re: [Sold] OpenTherm Gateway pcbs
Hallo Lennart, ik zou ook graag een Gateway PCB willen bestellen, ben echter nieuw op dit forum en weet nog niet goed de weg .
Ik kan kennelijk ook nog niet PM'n . hoor graag van je Groet Mark
Ik kan kennelijk ook nog niet PM'n . hoor graag van je Groet Mark
Re: [Sold] OpenTherm Gateway pcbs
Hoi Lennart, kan ik er nog een bestellen? Groeten, Jeroen
Re: [Poll for interest] OpenTherm Gateway pcbs
Ok, let's see if we can find enough people for a third batch...
UPDATE: Ok, we've made it. Batch is fully reserved, boards have been ordered. I''ve contacted all of you for payment and shipping info.
Same conditions as before: blue pcb, HASL finish. Price will be EUR 6,50 again (+ EUR 1,- for shipping within NL). I'll place the order if we reach 7 members who pledge to pay for a board. Once we reach 7, it'll take about 4 weeks to get the boards.
So far, I have:
1 - Mark59
2 - jeroenc
3 - daferra
4 - Zefram
5 - Edwin
6 - HanvA
7 - geert-jan
8 - Bastiaan
9 - spierie
10 - [Reserve board in case of any problems]
Please send me a PM or reply here if you are not on the list yet and certain that you want a board. And, also, please let me know if you're currently on the list and not interested anymore.
Lennart
UPDATE: Ok, we've made it. Batch is fully reserved, boards have been ordered. I''ve contacted all of you for payment and shipping info.
Same conditions as before: blue pcb, HASL finish. Price will be EUR 6,50 again (+ EUR 1,- for shipping within NL). I'll place the order if we reach 7 members who pledge to pay for a board. Once we reach 7, it'll take about 4 weeks to get the boards.
So far, I have:
1 - Mark59
2 - jeroenc
3 - daferra
4 - Zefram
5 - Edwin
6 - HanvA
7 - geert-jan
8 - Bastiaan
9 - spierie
10 - [Reserve board in case of any problems]
Please send me a PM or reply here if you are not on the list yet and certain that you want a board. And, also, please let me know if you're currently on the list and not interested anymore.
Lennart
Last edited by Lennart on Wed Oct 10, 2012 8:07 am, edited 7 times in total.
Re: [Poll for interest] OpenTherm Gateway pcbs
I think of building a Gateway to and would like to order the board if i know for shure it wil work with my boiler.
So please place me on the list for know
So please place me on the list for know
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s