Gateway problem with Remeha Avant and Celcia 20

This Forum is about the Opentherm gateway (OTGW) from Schelte

Moderator: hvxl

Post Reply
hermanvh
Starting Member
Starting Member
Posts: 5
Joined: Tue Jan 18, 2011 10:37 pm

Gateway problem with Remeha Avant and Celcia 20

Post by hermanvh »

Hello all,

I build assembled and tested the gateway, all seems to be fine.
I can communicate with the OTGW with a computer and see the OT messages passing by.
After startup the Celcia is also responding fine.

However after 4 to 5 OT messages the gateway reports Error 01 and some times Error 03, the Celcia reports error 203.
When the OTGW is put in monitor mode (GW=0 ) everything is fine again.
The command IT=1/0 does not help. Changes the reference voltage also does not help.

I am suspecting timing issues, but do not have a clue where to start debugging.

Any ideas?

Herman
hermanvh
Starting Member
Starting Member
Posts: 5
Joined: Tue Jan 18, 2011 10:37 pm

Re: Gateway problem with Remeha Avant and Celcia 20

Post by hermanvh »

SOLVED: IT=1 does work, did probably something wrong 1st time
Post Reply

Return to “Opentherm Gateway Forum”