I have purchased the opentherm gateway and this seems to work ok. When I connect it directly to my pc, using the USB hub, then I see the communication using the OTMonitor. I can also send commands.
But now I want to use the LAN/WIFI Tplink module that came with this shipment.
I connected the USB cable from the opentherm gateway to the USB hub that came with the shipment, and the cable from the USB hub goes to the TPlink USB connection.
Then opening the port 192.168.2.20:1001 in OT monitor does not give me a connection.
the following is retreived from the TP link logs.... Anyone can help me?
i will also try with another USB hub to make sure
Code: Select all
10.040000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 10.110000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 10.280000] hub 1-1:1.0: USB hub found
[ 10.280000] hub 1-1:1.0: 4 ports detected
[ 10.570000] usb 1-1.4: new high-speed USB device number 3 using ehci-platform
[ 10.680000] hub 1-1.4:1.0: USB hub found
[ 10.680000] hub 1-1.4:1.0: 4 ports detected
[ 10.970000] usb 1-1.4.4: new full-speed USB device number 4 using ehci-platform
[ 13.150000] device eth0 entered promiscuous mode
[ 13.590000] eth0: link up (100Mbps/Full duplex)
[ 13.590000] br-lan: port 1(eth0) entered forwarding state
[ 13.600000] br-lan: port 1(eth0) entered forwarding state
[ 15.600000] br-lan: port 1(eth0) entered forwarding state
Oct 26 00:07:37 Opentherm-gateway daemon.err ser2net[1033]: Could not open device /dev/ttyUSB0 for port 1001: No such file or directory
it looks like TPlink can not open the USB port to the gateway?