TP-Link Ethernet converter firmware image

This Forum is about the Opentherm gateway (OTGW) from Schelte

Moderator: hvxl

roblom
Starting Member
Starting Member
Posts: 40
Joined: Wed Apr 16, 2014 9:18 pm

Re: TP-Link Ethernet converter firmware image

Post by roblom »

Somebody?
Who developed this actually?
adijk
Starting Member
Starting Member
Posts: 18
Joined: Fri Dec 13, 2013 5:29 pm

Re: TP-Link Ethernet converter firmware image

Post by adijk »

Maybe you should have a look at this post: domoticaforum.eu/viewtopic.php?f=75&amp ... 189#p73174.

I don't have a TP-Link my self but it sure looks like the same problem.
jeroenc
Member
Member
Posts: 62
Joined: Tue Feb 15, 2011 2:09 pm
Location: Huissen

Re: TP-Link Ethernet converter firmware image

Post by jeroenc »

Hello all,

I would like to receive the firmware and manual as well pls.
And I second the previous poster; the seller has to provide more documentation that pressing the rest button gives more problems than it solves!
PS: TP Link TL-WR710N

Thanks for the help!

Regards, Jeroen
jeroenc
Member
Member
Posts: 62
Joined: Tue Feb 15, 2011 2:09 pm
Location: Huissen

Re: TP-Link Ethernet converter firmware image

Post by jeroenc »

*bump*
emmeesse68
Starting Member
Starting Member
Posts: 45
Joined: Thu Jan 22, 2015 1:48 pm

Re: TP-Link Ethernet converter firmware image

Post by emmeesse68 »

Hi all,

I bought a OTGW kit with USB option only, since WiFi option wasn't available, and because I already own an TL-WR710N (EU) v.1.2.

I'm interested in the configuration/firmware, I think (better: I hope) I can install OpenWRT on my own but a bit of documentation for the configuration would help...

Could anyone share the needed packages and configuration?

Thanks in advance

M
fgoldie2015
Starting Member
Starting Member
Posts: 1
Joined: Sat Mar 07, 2015 1:48 pm

Re: TP-Link Ethernet converter firmware image

Post by fgoldie2015 »

is it possible that i can get the firmware and manual for the TP-Link TL-wr710N to ?

Thanks.
jimlambe
Starting Member
Starting Member
Posts: 2
Joined: Tue Mar 19, 2013 4:14 pm

Re: TP-Link Ethernet converter firmware image

Post by jimlambe »

Does anybody have links to TL-WR703N and/or TL-710N working openwrt images so I can get my OTGW connected to my Vera Lite.

Jim!
emmeesse68
Starting Member
Starting Member
Posts: 45
Joined: Thu Jan 22, 2015 1:48 pm

Re: TP-Link Ethernet converter firmware image

Post by emmeesse68 »

jimlambe wrote:Does anybody have links to TL-WR703N and/or TL-710N working openwrt images so I can get my OTGW connected to my Vera Lite.

Jim!

Here you can get OpenWRT for a lot of devices based on the same Atheros SOC:

http://downloads.openwrt.org/latest/ar71xx/generic/

Better check your device wiki page to understand differences between hardware releases (e.g. 710n v2 has a smaller flash than v.1.xEU thus can handle only reduced size firmwares).

While I think it's a bit OT on this forum to get deeper in the subject, my advice is to take time and read OpenWRT wiki. If you're good with Linux, it's quite easy...
Post Reply

Return to “Opentherm Gateway Forum”