Using the gateway with Domoticz

This Forum is about the Opentherm gateway (OTGW) from Schelte

Moderator: hvxl

Post Reply
pwhooftman
Starting Member
Starting Member
Posts: 31
Joined: Thu Nov 14, 2013 12:15 pm

Using the gateway with Domoticz

Post by pwhooftman »

sappien wrote:I've got a problem with the setpoint setting. When I send a TT= to the gateway, the setpoint is correctly adjusted. But after 30/40 minutes the iSense restores the setpoint.
(iSense program is 07:00 21C - 21:00 15C) (using OTC+Eco mode setting)

14:00 i've send TT=15
14:40 Setpoint is set back to 19

Image
Hi,

I see you managed to present values from the OpenTherm gateway in Domoticz. Can you give me pointers how to achieve that?

Thanks.
sappien
Starting Member
Starting Member
Posts: 38
Joined: Fri Oct 16, 2009 11:11 am
Location: Netherlands

Re: Using the gateway with Domoticz

Post by sappien »

pwhooftman wrote:Hi,

I see you managed to present values from the OpenTherm gateway in Domoticz. Can you give me pointers how to achieve that?

Thanks.
Domoticz has support for the OpenTherm gateway (only readings at this moment, altering the temp must be done with a little script)
terrarium
Starting Member
Starting Member
Posts: 1
Joined: Sun Jan 26, 2014 12:04 am

Re: Using the gateway with Domoticz

Post by terrarium »

Domoticz has support for the OpenTherm gateway (only readings at this moment, altering the temp must be done with a little script)
My logfile shows:

OTGW connected to: 192.168.1.103:1001 (I have the OTGW wifi)

Otmonitor shows status of Boiler and I can see output in the log.
No devices show up in Domoticz however.

Running the latest Beta.

How long does it take for the devices to show?
How long does it take for the devices to show?

It takes some time apparently. .... It's up and running now.
Post Reply

Return to “Opentherm Gateway Forum”