Delete all alternative Data-ID's

This Forum is about the Opentherm gateway (OTGW) from Schelte

Moderator: hvxl

Post Reply
User avatar
andre_OT
Starting Member
Starting Member
Posts: 23
Joined: Thu Feb 28, 2013 12:45 pm

Delete all alternative Data-ID's

Post by andre_OT »

I know that I can delete alternative Data-ID's, using the DA command.
Than I have to know which ID's I have used in the past.

But when I forgot some of the alternative data-id's that I have used in the past, how will I know that they are there?
Is there a command to clear / delete all these alternative data-id's at once?
hvxl
Senior Member
Senior Member
Posts: 1966
Joined: Sat Jun 05, 2010 11:59 am
Contact:

Re: Delete all alternative Data-ID's

Post by hvxl »

No.
Schelte
gizmocuz
Starting Member
Starting Member
Posts: 5
Joined: Wed Dec 26, 2012 5:02 pm

Re: Delete all alternative Data-ID's

Post by gizmocuz »

that would interest me too, also listing them...
hvxl
Senior Member
Senior Member
Posts: 1966
Joined: Sat Jun 05, 2010 11:59 am
Contact:

Re: Delete all alternative Data-ID's

Post by hvxl »

You can quite easily find the alternative data ID's the gateway uses by taking a recent otmonitor log and then looking for messages preceded by an R, e.g.:

Code: Select all

grep -o R[08]0..0000 otlog-20140307.txt | sort -u
Translate the second byte of each line to decimal and issue a DA command with that number to delete it.
Schelte
Post Reply

Return to “Opentherm Gateway Forum”