Connecting Dimmer 2

Forum all about Z-Wave Fibaro
Post Reply
jonasm
Starting Member
Starting Member
Posts: 1
Joined: Tue Feb 14, 2017 4:23 pm

Connecting Dimmer 2

Post by jonasm »

Dear all,

I'm considering the purchase of a Fibaro Dimmer 2 to control 4 build-in LED spots. But actually I still have some questions about the installation.

For me, the Fibaro diagrams on their website are not that clear, so I will try to explain my set-up and questions.

I have 2 double toggle switches to control 4 build-in LED spots.
Pictures of both switches: https://www.dropbox.com/sh/34bpj4aghmbr ... u97wa?dl=0

1st double switch: right switch to control the 4 spots
2 brown wires on top
1 black wire on top
1 grey wire on top
1 yellow/green wire on top
1 grey wire at the bottom;
1 black wire at the bottom
blue wire in the wall socket

2nd double switch: right switch to control the same 4 spots
3 brown wires on top
1 black wire on top
1 grey wire at the bottom
blue wire in wall socket
brown wire in wall socket
yellow/green wire in wall socket

Can someone please explain if I need 1 or 2 Fibaro Dimmers to control the spots?
Can someone explain how I have to connect the dimmers? To which switch? Pictures would be great as I'm a real newbie in this matter.

Thanks in advance.

Kind regards,
Jonas
Post Reply

Return to “Fibaro”