Marmitek webcams

Forum to Introduce Home Automation Domotica related hardware here.....
Post Reply
User avatar
Peterpc
Member
Member
Posts: 217
Joined: Sun Sep 30, 2007 12:54 pm
Location: Netherlands
Contact:

Marmitek webcams

Post by Peterpc »

Marmitek has a range of new webcams:
http://www.marmitek.com/en/catalogus/pr ... roduct=438


Image

Hear and see everything, anywhere, via your network or internet connection
Colour security camera with high sensitivity for perfect images at low light conditions. With IR LED#65533;s for use in total darkness.
With the powerful, user friendly UltraView software you can watch and operate up to 16 camera#65533;s simultaneously everywhere in the world.
Operate the camera fully remotely: panning, tilting, zooming, adjusting the resolution and many other settings.
Program up to 8 camera positions and cycle through them automatically. The pre-set camera positions can be watched with just a push of a button.
Have images sent to your e-mail address periodically or by motion detection.
With GPIO (General Purpose Input and Output); for instance create an image recording automatically by opening a door or switch your lighting based upon (HW/SW) motion detection.
High quality MPEG4 compression for efficient network traffic and data storage.
Send parallel MJPEG, MPEG4 and 3GPP images, each with its own settings.
3GPP for watching live images on your mobile telephone or PDA.
With built-in microphone and speaker terminal.
USB connector for stand alone recording feature (for instance harddisk or USB-stick).
Simple installation with enclosed software.
Can be used both wired and wirelessly.
No local PC required!
Post Reply

Return to “Announcements & News Forum”