SweetBox

Forum to Introduce Home Automation Domotica related hardware here.....
Post Reply
akhe
Starting Member
Starting Member
Posts: 31
Joined: Tue Dec 18, 2007 5:22 pm
Location: Sweden
Contact:

SweetBox

Post by akhe »

Hi again Guys,

it's me again with my hat in my hand humbly asking (or shamelessly, if you like) for you to vote on my design the <b>SweetBox</b>. http://www.mypic32.com/web/guest/contes ... leID=43308 in the PIC32 contest. Just register on the site (can be hard enough, it's not a very friendly site) and the click on "Cast My Vote" on the <b>SweetBox</b> page. If you voted before please do so again as this is a new phase and a new vote.

The status for the thing is that I have done and tested most of the hardware now. Ethernet/TCP/IP, CAN, RF is in place. Also IR receiver, IR transmitter, barometer, humidity sensor, ambient light sensor, temp sensor, proximity sensor, EEPROM and RGB Led array is in place and tested. Next week I will do the sound part. That is, making the little thing talk (and maybe sing) and also allow it to record through a microphone.

After that everything is done hardware vice and I can just hope the judges allow me to continue to the next phase so I can do the software as well. Most interestingly for people on this list the MiWi based home automation protocol.

Please vote! The only thing I can offer back is some good karma... ;)

Cheers
/Ake
akhe
Starting Member
Starting Member
Posts: 31
Joined: Tue Dec 18, 2007 5:22 pm
Location: Sweden
Contact:

SweetBox

Post by akhe »

The SweetBox http://www.mypic32.com/web/guest/contes ... leID=43308 made it to the next phase. Thanks for anyone voting. Now I can do the software and a real PCB for the thing. [:p]
Post Reply

Return to “Announcements & News Forum”