Marmitek IP Robocam

Forum to Introduce Home Automation Domotica related hardware here.....
Post Reply
DJF3
Advanced Member
Advanced Member
Posts: 895
Joined: Thu Jul 12, 2007 9:28 am
Contact:

Marmitek IP Robocam

Post by DJF3 »

New PTZ camera's from Marmitek, now with IP interface (wired or wireless).

<b>Pan&Tilt IP Cameras</b>
Image
- Monitor and protect everything, anywhere, via your network or internet connection
- Colour security camera with high sensitivity for perfect images at low light conditions.
- No local PC required!
- Operate the camera fully remotely: panning, tilting, zooming, adjusting the resolution and many other settings.
- With the powerful, user friendly UltraView software you can watch and operate up to 16 camera's simultaneously everywhere in the world.
- Have images sent to your e-mail address periodically or by motion detection.
- Program up to 8 camera positions and cycle through them automatically. The pre-set camera positions can be watched with just a push of a button.
- With GPIO (General Purpose Input and Output); for instance create an image recording automatically by opening a door or switch your lighting based upon (HW/SW) motion detection.
- Simple installation with enclosed software.

IP RoboCam10 179,00 Euro (JPEG, wired)
http://www.marmitek.com/en/index_consum ... roduct=436
IP RoboCam11 199,00 Euro (JPEG, usable both wireless and wired)
http://www.marmitek.com/en/index_consum ... roduct=437



<b>IP RoboCam21</b>
Image
The IP RoboCam21 has some extra special features with regard to the IP RoboCam 10 and IP RoboCam11:
- High quality MPEG4 compression for efficient network traffic and storage.
- Sends MJPEG, MPEG4 and 3GPP images simultaneously, each with their own settings.
- 3GPP for live viewing of the images on your mobile telephone of PDA.
- With built in speaker connection and microphone for 2-way communication.
- With IR LEDs for use in total darkness.
- USB connection for autonomous recording feature (for instance hard disk or USB memory stick). In combination with the optional all-weather casing you can also mount every IP RoboCam outside. So... for every use we have a suitable solution.

269,00 Euro VAT included (MPEG4, usable both wireless and wired)
http://www.marmitek.com/en/index_consum ... roduct=438


Have you seen/used/tested this product, please post your experience.


Bye
DJ
User avatar
Snelvuur
Forum Moderator
Forum Moderator
Posts: 3156
Joined: Fri Apr 06, 2007 11:01 pm
Location: Netherlands
Contact:

Marmitek IP Robocam

Post by Snelvuur »

outdoor housings?

// Erik (binkey.nl)
drmacchi
Advanced Member
Advanced Member
Posts: 827
Joined: Wed Aug 08, 2007 5:48 pm
Location: Italy

Marmitek IP Robocam

Post by drmacchi »

I received an advertisment form Marmitek last evening, outdoor IP66 available at 249 euros. So ipcam 21 + housing is more than 500 euros.... they don't have zoom feature..... if housing was cheaper it could be a good affair
User avatar
TANE
Forum Moderator
Forum Moderator
Posts: 4806
Joined: Fri Apr 06, 2007 9:46 pm
Location: Netherlands
Contact:

Marmitek IP Robocam

Post by TANE »

I have seen some pictures of this camera..it okay.
Axis is better..but also the price is higher.

Hope to have test version soon.
drmacchi
Advanced Member
Advanced Member
Posts: 827
Joined: Wed Aug 08, 2007 5:48 pm
Location: Italy

Marmitek IP Robocam

Post by drmacchi »

They do have ZOOM (1-2-3x) A nice feature is the connector to be moved by an x10 triggering event and usb port where to plug an usb memory to save pictures..damn, just a little price down and they could be perfect!
Post Reply

Return to “Announcements & News Forum”