Page 1 of 1

Velleman VM201 netwerk relais kaart

Posted: Thu Oct 03, 2013 8:25 pm
by Bwired
I came across this network relay controller from Velleman
http://www.velleman.eu/products/view/?id=407510
image.jpg
image.jpg (110.23 KiB) Viewed 19976 times
Also android and ios app available

Specs from the Velleman site
IEEE 802.3 compatibele Ethernet controller
ondersteunt 10 Base-T poort (10Mbps)
statisch IP of DHCP
door gebruiker definieerbare NETBios-naam
gebruik SNTP tijdsynchronisatieprotocol als real time clock
stuurt e-mail bij het inschakelen en verandering van de inputstatus (bij het inschakelen en/of uitschakelen)
webinterface voor configuratie en bediening
TCP-server (door gebruiker definieerbare poort)
LCD-scherm toont de tijd- of netwerkinstellingen
door gebruiker definieerbare namen voor alle in- en uitgangen
meerdere gebruikers (1 beheerder en 3 extra gebruikers)
timerprogramma's voor de 8 kanalen
max.28 timerprogramma's
Programma: bepaalde dag, weekend, werkdagen, dagelijks en elke dag behalve zondag
Acties: aan, uit of puls (1 tot 99 s.,1 tot 99 min. of 1 tot 99u.)
Specificaties

8 relaiscontacten: 12A @ 30Vdc of 16A @ 230Vac
1 ingang: droog contact of 5…20Vac of dc spanningsingang
voeding: 12Vac/500mA

Re: Velleman VM201 netwerk relais kaart

Posted: Fri Oct 04, 2013 8:19 am
by kriz83
Ziet er niet verkeerd uit.
Enig idee over de prijs ?

Wel spijtig dat ie maar 1 input heeft, ben op zoek naar iets dat minstens 3 outputs en evenveel inputs heeft.

Gr

Re: Velleman VM201 netwerk relais kaart

Posted: Fri Oct 04, 2013 9:20 am
by Bwired
yes only one input and also only for mail it looks like
145 euro Conrad
http://www.conrad.nl/ce/nl/product/092654/

Re: Velleman VM201 netwerk relais kaart

Posted: Fri Oct 04, 2013 4:25 pm
by redleg
I have used these boards, CAI Webcontrol. I do not use them. So do a nice bid :)

See my earlier post> domoticaforum.eu/viewtopic.php?f=26& ... rol#p61040

Product info cainetworks.com/products/webcontrol/web ... matrix.htm

ETH484 - 4 Relays at 16A, 8 Digital IO and 4 Analogue Inputs

Posted: Thu Nov 07, 2013 11:28 am
by Bwired
ETH484 - 4 Relays at 16A, 8 Digital IO and 4 Analogue Inputs

This one from ETH is better, also IO ports and IP notification
http://www.robot-electronics.co.uk/htm/eth484tech.htm


eth484-400.png
eth484-400.png (106.98 KiB) Viewed 19914 times

Re: Velleman VM201 netwerk relais kaart

Posted: Fri Nov 08, 2013 9:39 am
by kriz83
Looks interesting !
80 euro, not too bad ...

Re: Velleman VM201 netwerk relais kaart

Posted: Mon Nov 11, 2013 11:39 pm
by Bwired
To bad Not available in Nl, right ?

Re: Velleman VM201 netwerk relais kaart

Posted: Tue Nov 12, 2013 6:26 pm
by Fantic

Re: Velleman VM201 netwerk relais kaart

Posted: Tue Nov 12, 2013 8:47 pm
by Bwired
Thanks orderded 1 :-)

Re: Velleman VM201 netwerk relais kaart

Posted: Wed Jan 29, 2014 12:59 pm
by vincenttor
isn't it much cheaper to order a raspberry and connect the relays to the GPIO ?
Also gives allot more functions ofc and could be used with a wireless connection if needed.

Re: Velleman VM201 netwerk relais kaart

Posted: Thu Jan 30, 2014 9:56 pm
by Post-IT
I use a Barix Barionet 50. Highly configurable, two serial ports (rs485 + rs232), 4 digital inputs, 4 relay outputs and Dallas 1-wire support. They also have other versions with more I/O. But you can also connect several Barionets to extend your current one, it then uses a separate rs485 port to communicate between Barionets.

http://www.barix.com/products/barionet-family/